Varför kraschar min maskin med denna kod?

[X-IL]

Tar tillbaka det där, den tappar steg i just den snabbförflyttningen. Enda förklaringen jag kan komma på är att kablarna hamnar så att den inte klarar av att trycka upp just vid den X,Y-positionen...

Nå då är det ett fel som går att lösa enkelt i alla fall.

[säter]

Kör du inte flera liknande hål i programet, som fungerar?

Posta hela programet här, utan kommentarer.

[tecno]

Du har normal feedrate och inte override?

Det som Boris var inne på att redigera om dina G0 till G1 Z20 F400 typ kanske fungerar? Men jag tror att det mycket väl kan var dina CV inställningar, prova ställa in Exact stop istället.

Ahaa... mekaniskt, ja om så är det ju lättare att fixa det först.

Samma lika på 6 hål säter men bara ett som strular

[säter]

Samma lika på 6 hål säter men bara ett som strular

Då faller ju hela resonemanget att det skulle vara fel på någon inställning.
Antingen är det ett mekaniskt/elektriskt fel, eller fel i programmet.

[tecno]

Koden är OK, har kört hela hos mig, så nåt skit är det med maskinen. Z är tung vad jag har förstått och då är risken uppenbar att man tappar steg vid hög acceleration (ja även låg om motståndet är för högt).

[X-IL]

Ja det verkar mekaniskt som sagt, men att det yttrar sig på bara ett av sex hål som dessutom flyttat runt lite (nollar manuellt och har ingen fixtur) det trodde jag var osannolikt. Men det enda jag kan tänka mig är att kablarna hamnar i en ogynnsam vinkel/position och bromsar Z. Nå det får bli lite pill så ska det nog funka.

[säter]

Du kan väl posta hela koden, för skojs skull.

[X-IL]

Absolut!

Kod: Markera allt

( Made using CamBam - http://www.cambam.co.uk )
( Toolrack 9/30/2012 1:35:09 PM )
( T0 : 7.5 )
( T5 : 7.5 )
( T10 : 1.0 )
G21 G90 G64 G40
G0 Z20.0
( T5 : 7.5 )
T5 M6
( 3DSurface1 )
G17
M3 S1000
G0 X50.9784 Y91.7157
G1 F400.0 Z-1.0
G2 F2500.0 X50.3166 Y91.9495 I-0.9783 J-1.7155
G1 X50.9784 Y91.7157
G1 F400.0 X52.4646 Y94.3217
G2 F2500.0 X51.1205 Y94.8472 I-2.4645 J-4.3215
G1 X52.1734 Y94.4752
G2 X52.4646 Y94.3217 I-2.1733 J-4.4751
G1 F400.0 X50.9675 Y91.6931
G1 Z-2.0
G2 F2500.0 X50.3109 Y91.9251 I-0.9675 J-1.693
G1 X50.9675 Y91.6931
G1 F400.0 X51.9669 Y94.5217
G1 F2500.0 X52.163 Y94.4525
G2 X51.1142 Y94.823 I-2.163 J-4.4523
G1 X51.9669 Y94.5217
G1 F400.0 X50.9566 Y91.6706
G1 Z-3.0
G2 F2500.0 X50.3052 Y91.9007 I-0.9566 J-1.6704
G1 X50.9566 Y91.6706
G1 F400.0 X51.9561 Y94.4992
G1 F2500.0 X52.1526 Y94.4297
G2 X51.108 Y94.7988 I-2.1526 J-4.4296
G1 X51.9561 Y94.4992
G1 F400.0 X50.9457 Y91.648
G1 Z-4.0
G2 F2500.0 X50.2995 Y91.8764 I-0.9457 J-1.6479
G1 X50.9457 Y91.648
G1 F400.0 X52.439 Y94.25
G2 F2500.0 X51.1018 Y94.7746 I-2.4389 J-4.2499
G1 X52.1423 Y94.407
G2 X52.439 Y94.25 I-2.1422 J-4.4069
G1 F400.0 X50.9487 Y91.5823
G1 Z-5.0
G1 F2500.0 X51.1961 Y91.4441
G2 X50.6026 Y91.7757 I-1.1962 J-1.4442
G1 X50.9487 Y91.5823
G1 F400.0 X52.4118 Y94.2014
G1 F2500.0 X52.8422 Y93.9609
G2 X51.8827 Y94.497 I-2.8423 J-3.961
G1 X52.4118 Y94.2014
G1 F400.0 X50.9366 Y91.5606
G1 Z-6.0
G1 F2500.0 X51.1816 Y91.4237
G2 X50.5928 Y91.7526 I-1.1816 J-1.4238
G1 X50.9366 Y91.5606
G1 F400.0 X52.3997 Y94.1796
G1 F2500.0 X52.8281 Y93.9403
G2 X51.8725 Y94.4742 I-2.8282 J-3.9404
G1 X52.3997 Y94.1796
G1 F400.0 X50.9245 Y91.5389
G1 Z-7.0
G1 F2500.0 X51.167 Y91.4034
G2 X50.5831 Y91.7295 I-1.1671 J-1.4035
G1 X50.9245 Y91.5389
G1 F400.0 X52.3875 Y94.1579
G1 F2500.0 X52.8141 Y93.9196
G2 X51.8623 Y94.4514 I-2.8141 J-3.9197
G1 X52.3875 Y94.1579
G1 F400.0 X50.9123 Y91.5171
G1 Z-8.0
G1 F2500.0 X51.1524 Y91.383
G2 X50.5735 Y91.7064 I-1.1525 J-1.3831
G1 X50.9123 Y91.5171
G1 F400.0 X52.3754 Y94.1362
G1 F2500.0 X52.8 Y93.899
G2 X51.852 Y94.4286 I-2.8001 J-3.8991
G1 X52.3754 Y94.1362
G1 F400.0 X50.8912 Y91.5354
G1 Z-9.0
G2 F2500.0 X50.2712 Y91.7544 I-0.8911 J-1.5353
G1 X50.8912 Y91.5354
G1 F400.0 X52.3972 Y94.1299
G2 F2500.0 X51.0708 Y94.6537 I-2.3972 J-4.1298
G1 X52.0904 Y94.2934
G2 X52.3972 Y94.1299 I-2.0904 J-4.2933
G1 F400.0 X50.9073 Y91.4629
G1 Z-10.0
G1 F2500.0 X51.1233 Y91.3423
G2 X50.5541 Y91.6603 I-1.1233 J-1.3424
G1 X50.9073 Y91.4629
G1 F400.0 X52.3704 Y94.082
G1 F2500.0 X52.7719 Y93.8577
G2 X51.8316 Y94.383 I-2.7719 J-3.8578
G1 X52.3704 Y94.082
G1 F400.0 X50.8665 Y91.4922
G1 Z-11.0
G2 F2500.0 X50.7398 Y88.4413 I-0.8665 J-1.4921
G1 X50.1143 Y88.2785
G2 X50.8665 Y91.4922 I-0.1143 J1.7216
G1 F400.0 X52.373 Y94.0865
G2 F2500.0 X51.702 Y85.5919 I-2.373 J-4.0864
G1 X50.664 Y85.3216
G2 X52.373 Y94.0865 I-0.664 J4.6785
G1 F400.0 X50.8539 Y91.4706
G1 Z-12.0
G2 F2500.0 X50.7308 Y88.4647 I-0.8539 J-1.4705
G1 X50.1108 Y88.3033
G2 X50.8539 Y91.4706 I-0.1108 J1.6968
G1 F400.0 X52.3605 Y94.0649
G2 F2500.0 X51.6936 Y85.6154 I-2.3605 J-4.0648
G1 X50.6599 Y85.3462
G2 X52.3605 Y94.0649 I-0.6599 J4.6539
G1 F400.0 X50.8414 Y91.449
G1 Z-13.0
G2 F2500.0 X50.7217 Y88.4881 I-0.8414 J-1.4489
G1 X50.1073 Y88.3281
G2 X50.8414 Y91.449 I-0.1073 J1.672
G1 F400.0 X52.3479 Y94.0433
G2 F2500.0 X51.6852 Y85.6389 I-2.3479 J-4.0432
G1 X50.6557 Y85.3709
G2 X52.3479 Y94.0433 I-0.6557 J4.6293
G1 F400.0 X50.8288 Y91.4274
G1 Z-14.0
G2 F2500.0 X50.7127 Y88.5114 I-0.8289 J-1.4273
G1 X50.1038 Y88.3529
G2 X50.8288 Y91.4274 I-0.1038 J1.6472
G1 F400.0 X52.3354 Y94.0217
G2 F2500.0 X51.6768 Y85.6624 I-2.3354 J-4.0216
G1 X50.6516 Y85.3955
G2 X52.3354 Y94.0217 I-0.6516 J4.6046
G1 F400.0 X50.8163 Y91.4058
G1 Z-15.0
G2 F2500.0 X50.7037 Y88.5348 I-0.8163 J-1.4057
G1 X50.1003 Y88.3777
G2 X50.8163 Y91.4058 I-0.1003 J1.6224
G1 F400.0 X52.3229 Y94.0001
G2 F2500.0 X51.6684 Y85.6859 I-2.3229 J-4.0
G1 X50.6475 Y85.4201
G2 X52.3229 Y94.0001 I-0.6475 J4.58
G0 Z20.0
G0 X50.0716 Y31.9737
G1 F400.0 Z-1.0
G2 F2500.0 X50.3166 Y31.9495 I-0.0716 J-1.9737
G1 X50.9784 Y31.7157
G2 X50.0716 Y31.9737 I-0.9784 J-1.7156
G1 F400.0 X50.1805 Y34.9718
G2 F2500.0 X51.1205 Y34.8472 I-0.1804 J-4.9717
G1 X52.1734 Y34.4752
G2 X50.1805 Y34.9718 I-2.1734 J-4.4751
G1 F400.0 X50.0707 Y31.9488
G1 Z-2.0
G2 F2500.0 X50.3109 Y31.9251 I-0.0707 J-1.9487
G1 X50.9675 Y31.6931
G2 X50.0707 Y31.9488 I-0.9675 J-1.693
G1 F400.0 X50.1796 Y34.9468
G2 F2500.0 X51.1142 Y34.823 I-0.1795 J-4.9467
G1 X52.163 Y34.4525
G2 X50.1796 Y34.9468 I-2.163 J-4.4524
G1 F400.0 X50.0698 Y31.9238
G1 Z-3.0
G2 F2500.0 X50.3052 Y31.9007 I-0.0698 J-1.9238
G1 X50.9566 Y31.6706
G2 X50.0698 Y31.9238 I-0.9566 J-1.6705
G1 F400.0 X50.1786 Y34.9218
G2 F2500.0 X51.108 Y34.7988 I-0.1786 J-4.9218
G1 X52.1526 Y34.4297
G2 X50.1786 Y34.9218 I-2.1526 J-4.4297
G1 F400.0 X50.0689 Y31.8989
G1 Z-4.0
G2 F2500.0 X50.6123 Y31.7988 I-0.069 J-1.899
G1 X51.2107 Y31.4645
G2 X50.0689 Y31.8989 I-1.2108 J-1.4646
G1 F400.0 X50.1777 Y34.8969
G2 F2500.0 X51.8929 Y34.5197 I-0.1778 J-4.897
G1 X52.8563 Y33.9816
G2 X50.1777 Y34.8969 I-2.8563 J-3.9817
G1 F400.0 X50.068 Y31.8739
G1 Z-5.0
G2 F2500.0 X50.6026 Y31.7757 I-0.068 J-1.8741
G1 X51.1961 Y31.4441
G2 X50.068 Y31.8739 I-1.1962 J-1.4442
G1 F400.0 X50.1768 Y34.872
G2 F2500.0 X51.8827 Y34.497 I-0.1769 J-4.8721
G1 X52.8422 Y33.9609
G2 X50.1768 Y34.872 I-2.8423 J-3.9611
G1 F400.0 X50.0671 Y31.849
G1 Z-6.0
G2 F2500.0 X50.5928 Y31.7526 I-0.0671 J-1.8491
G1 X51.1816 Y31.4237
G2 X50.0671 Y31.849 I-1.1817 J-1.4239
G1 F400.0 X50.1759 Y34.847
G2 F2500.0 X51.8725 Y34.4742 I-0.176 J-4.8471
G1 X52.8281 Y33.9403
G2 X50.1759 Y34.847 I-2.8282 J-3.9404
G1 F400.0 X50.0662 Y31.824
G1 Z-7.0
G2 F2500.0 X50.2825 Y31.8032 I-0.0662 J-1.8239
G1 X50.913 Y31.5804
G2 X50.0662 Y31.824 I-0.913 J-1.5803
G1 F400.0 X50.175 Y34.822
G2 F2500.0 X51.0832 Y34.702 I-0.175 J-4.822
G1 X52.1112 Y34.3388
G2 X50.175 Y34.822 I-2.1111 J-4.3388
G1 F400.0 X50.0652 Y31.7991
G1 Z-8.0
G2 F2500.0 X50.5734 Y31.7065 I-0.0653 J-1.7992
G1 X51.1524 Y31.383
G2 X50.0652 Y31.7991 I-1.1525 J-1.3832
G1 F400.0 X50.1741 Y34.7971
G2 F2500.0 X51.852 Y34.4286 I-0.1742 J-4.7972
G1 X52.8 Y33.899
G2 X50.1741 Y34.7971 I-2.8001 J-3.8991
G1 F400.0 X50.0643 Y31.7741
G1 Z-9.0
G2 F2500.0 X51.3131 Y31.1947 I-0.0644 J-1.7742
G1 X51.6579 Y30.6347
G2 X50.0643 Y31.7741 I-1.658 J-0.6348
G1 F400.0 X50.1732 Y34.7722
G2 F2500.0 X53.7566 Y32.948 I-0.1733 J-4.7722
G1 X54.3236 Y32.0272
G2 X50.1732 Y34.7722 I-4.3237 J-2.0272
G1 F400.0 X50.0402 Y31.6676
G1 Z-10.0
G2 F2500.0 X48.6882 Y28.8412 I-0.0729 J-1.7017
G3 X48.6861 Y28.8436 I-5.0691 J-4.4572
G2 X48.265 Y29.7689 I1.3139 J1.1564
G3 X48.2643 Y29.9375 I-6.7498 J0.056
G2 X50.0402 Y31.6676 I1.703 J0.0284
G1 F400.0 X50.1686 Y34.6648
G2 F2500.0 X46.4353 Y26.8603 I-0.2013 J-4.6989
G3 X46.4341 Y26.8616 I-2.8162 J-2.4762
G2 X45.2617 Y29.6623 I3.5659 J3.1384
G1 X45.2619 Y29.6657
G3 X45.2648 Y29.8875 I-3.7466 J0.1592
G2 X50.1686 Y34.6648 I4.7026 J0.0784
G1 F400.0 X50.023 Y31.6127
G1 Z-11.0
G2 F2500.0 X48.5539 Y29.0588 I-0.0789 J-1.6541
G2 X48.2881 Y29.9673 I1.7707 J1.0111
G2 X50.023 Y31.6127 I1.656 J-0.0087
G1 F400.0 X50.166 Y34.6093
G2 F2500.0 X45.9893 Y27.5015 I-0.2219 J-4.6507
G2 X45.2885 Y29.897 I4.3353 J2.5685
G2 X50.166 Y34.6093 I4.6556 J0.0617
G1 F400.0 X50.0255 Y31.598
G1 Z-12.0
G2 F2500.0 X48.5728 Y29.0756 I-0.0763 J-1.6356
G2 X48.3118 Y29.9633 I1.7157 J0.9865
G2 X50.0255 Y31.598 I1.6374 J-0.0008
G1 F400.0 X50.1653 Y34.5947
G2 F2500.0 X46.0092 Y27.5167 I-0.2161 J-4.6323
G2 X45.3124 Y29.8868 I4.2793 J2.5454
G2 X50.1653 Y34.5947 I4.6367 J0.0756
G1 F400.0 X50.0282 Y31.5838
G1 Z-13.0
G2 F2500.0 X48.5916 Y29.0925 I-0.0736 J-1.6174
G2 X48.3355 Y29.9594 I1.6608 J0.9619
G2 X50.0282 Y31.5838 I1.619 J0.007
G1 F400.0 X50.1646 Y34.5807
G2 F2500.0 X46.0291 Y27.532 I-0.2101 J-4.6143
G2 X45.3364 Y29.8767 I4.2234 J2.5224
G2 X50.1646 Y34.5807 I4.6182 J0.0897
G1 F400.0 X50.0311 Y31.57
G1 Z-14.0
G2 F2500.0 X48.6104 Y29.1094 I-0.0709 J-1.5995
G2 X48.3592 Y29.9556 I1.6059 J0.9372
G2 X50.0311 Y31.57 I1.601 J0.0149
G1 F400.0 X50.164 Y34.5671
G2 F2500.0 X46.0489 Y27.5474 I-0.2039 J-4.5965
G2 X45.3603 Y29.8668 I4.1674 J2.4992
G2 X50.164 Y34.5671 I4.5999 J0.1038
G1 F400.0 X50.0343 Y31.5569
G1 Z-15.0
G2 F2500.0 X48.6292 Y29.1265 I-0.0682 J-1.5819
G2 X48.3829 Y29.952 I1.5511 J0.9124
G2 X50.0343 Y31.5569 I1.5832 J0.0229
G1 F400.0 X50.1635 Y34.5541
G2 F2500.0 X46.0688 Y27.5628 I-0.1974 J-4.5791
G2 X45.3842 Y29.8569 I4.1115 J2.4761
G2 X50.1635 Y34.5541 I4.5819 J0.1181
G0 Z20.0
G0 X148.0845 Y30.0255
G1 F400.0 Z-1.0
G2 F2500.0 X150.6676 Y28.1473 I1.9101 J-0.0883
G2 X149.9787 Y28.025 I-0.7196 J2.0526
G2 X148.0845 Y30.0255 I0.016 J1.9121
G1 F400.0 X145.0877 Y30.1641
G2 F2500.0 X151.6913 Y25.3273 I4.9069 J-0.2269
G2 X149.988 Y25.025 I-1.7433 J4.8727
G2 X145.0877 Y30.1641 I0.0067 J4.9121
G1 F400.0 X148.0518 Y30.0648
G1 Z-2.0
G2 F2500.0 X151.1076 Y28.395 I1.9484 J-0.0653
G1 X150.473 Y28.1082
G2 X148.0518 Y30.0648 I-0.4728 J1.8913
G1 F400.0 X145.0535 Y30.1652
G2 F2500.0 X152.5328 Y25.747 I4.9467 J-0.1657
G1 X151.5193 Y25.2888
G2 X145.0535 Y30.1652 I-1.5191 J4.7106
G1 F400.0 X148.0767 Y30.064
G1 Z-3.0
G2 F2500.0 X151.0948 Y28.4166 I1.9235 J-0.0644
G1 X150.4653 Y28.132
G2 X148.0767 Y30.064 I-0.4651 J1.8675
G1 F400.0 X145.0783 Y30.1644
G2 F2500.0 X152.5205 Y25.7688 I4.9218 J-0.1648
G1 X151.511 Y25.3124
G2 X145.0783 Y30.1644 I-1.5108 J4.6871
G1 F400.0 X148.1015 Y30.0632
G1 Z-4.0
G2 F2500.0 X151.0821 Y28.4381 I1.8986 J-0.0636
G1 X150.4576 Y28.1558
G2 X148.1015 Y30.0632 I-0.4574 J1.8438
G1 F400.0 X145.1032 Y30.1635
G2 F2500.0 X152.5083 Y25.7905 I4.8969 J-0.164
G1 X151.5028 Y25.336
G2 X145.1032 Y30.1635 I-1.5026 J4.6636
G1 F400.0 X148.2046 Y30.0748
G1 Z-5.0
G2 F2500.0 X151.5615 Y31.0384 I1.8318 J-0.0524
G2 X151.8466 Y29.7375 I-5.5425 J-1.8964
G2 X148.2046 Y30.0748 I-1.8102 J0.285
G1 F400.0 X145.2059 Y30.1606
G2 F2500.0 X154.2859 Y32.3236 I4.8306 J-0.1382
G2 X154.8588 Y29.7094 I-8.2668 J-3.1816
G2 X145.2059 Y30.1606 I-4.8224 J0.313
G1 F400.0 X148.2448 Y30.0765
G1 Z-6.0
G2 F2500.0 X151.5402 Y31.0254 I1.7987 J-0.0498
G2 X151.8211 Y29.7483 I-5.4582 J-1.8698
G2 X148.2448 Y30.0765 I-1.7777 J0.2785
G1 F400.0 X145.2459 Y30.1595
G2 F2500.0 X154.2641 Y32.3114 I4.7975 J-0.1327
G2 X154.8332 Y29.7237 I-8.1821 J-3.1558
G2 X145.2459 Y30.1595 I-4.7898 J0.3031
G1 F400.0 X148.2846 Y30.0782
G1 Z-7.0
G2 F2500.0 X151.519 Y31.0123 I1.7657 J-0.0472
G2 X151.7955 Y29.759 I-5.374 J-1.8432
G2 X148.2846 Y30.0782 I-1.7452 J0.272
G1 F400.0 X145.2857 Y30.1584
G2 F2500.0 X154.2424 Y32.2992 I4.7646 J-0.1274
G2 X154.8076 Y29.7379 I-8.0974 J-3.13
G2 X145.2857 Y30.1584 I-4.7573 J0.2931
G1 F400.0 X148.3243 Y30.0799
G1 Z-8.0
G2 F2500.0 X151.4977 Y30.9992 I1.7328 J-0.0448
G2 X151.77 Y29.7696 I-5.2898 J-1.8165
G2 X148.3243 Y30.0799 I-1.7129 J0.2656
G1 F400.0 X145.3253 Y30.1574
G2 F2500.0 X154.2206 Y32.2869 I4.7318 J-0.1222
G2 X154.782 Y29.752 I-8.0127 J-3.1042
G2 X145.3253 Y30.1574 I-4.7249 J0.2832
G1 F400.0 X148.3637 Y30.0817
G1 Z-9.0
G2 F2500.0 X151.4764 Y30.9861 I1.7001 J-0.0424
G2 X151.7445 Y29.78 I-5.2056 J-1.7898
G2 X148.3637 Y30.0817 I-1.6807 J0.2593
G1 F400.0 X145.3647 Y30.1564
G2 F2500.0 X154.1989 Y32.2746 I4.6991 J-0.1171
G2 X154.7564 Y29.7661 I-7.9281 J-3.0783
G2 X145.3647 Y30.1564 I-4.6926 J0.2732
G1 F400.0 X148.3374 Y30.0779
G1 Z-10.0
G2 F2500.0 X151.2648 Y31.2101 I1.7 J-0.0449
G2 X151.7179 Y29.772 I-3.6697 J-1.9466
G2 X148.3374 Y30.0779 I-1.6805 J0.261
G1 F400.0 X145.3384 Y30.1571
G2 F2500.0 X153.7348 Y32.9356 I4.699 J-0.1242
G2 X154.7309 Y29.774 I-6.1397 J-3.6721
G2 X145.3384 Y30.1571 I-4.6935 J0.259
G1 F400.0 X148.3702 Y30.079
G1 Z-11.0
G2 F2500.0 X151.2463 Y31.1933 I1.6706 J-0.0431
G2 X151.6924 Y29.7814 I-3.61 J-1.9172
G2 X148.3702 Y30.079 I-1.6517 J0.2545
G1 F400.0 X145.3712 Y30.1563
G2 F2500.0 X153.7156 Y32.9196 I4.6696 J-0.1203
G2 X154.7053 Y29.7875 I-6.0792 J-3.6435
G2 X145.3712 Y30.1563 I-4.6646 J0.2484
G1 F400.0 X148.4028 Y30.0801
G1 Z-12.0
G2 F2500.0 X151.2278 Y31.1765 I1.6413 J-0.0413
G2 X151.667 Y29.7908 I-3.5502 J-1.8877
G2 X148.4028 Y30.0801 I-1.623 J0.248
G1 F400.0 X145.4037 Y30.1555
G2 F2500.0 X153.6964 Y32.9036 I4.6403 J-0.1166
G2 X154.6798 Y29.801 I-6.0188 J-3.6148
G2 X145.4037 Y30.1555 I-4.6357 J0.2378
G1 F400.0 X148.4352 Y30.0812
G1 Z-13.0
G2 F2500.0 X151.2094 Y31.1597 I1.6121 J-0.0395
G2 X151.6417 Y29.8 I-3.4905 J-1.8582
G2 X148.4352 Y30.0812 I-1.5944 J0.2417
G1 F400.0 X145.4361 Y30.1547
G2 F2500.0 X153.6772 Y32.8876 I4.6112 J-0.113
G2 X154.6543 Y29.8145 I-5.9583 J-3.5862
G2 X145.4361 Y30.1547 I-4.607 J0.2272
G1 F400.0 X148.4675 Y30.0823
G1 Z-14.0
G2 F2500.0 X151.191 Y31.1428 I1.583 J-0.0378
G2 X151.6163 Y29.8091 I-3.4308 J-1.8287
G2 X148.4675 Y30.0823 I-1.5658 J0.2353
G1 F400.0 X145.4683 Y30.1539
G2 F2500.0 X153.6581 Y32.8716 I4.5821 J-0.1095
G2 X154.6287 Y29.8278 I-5.8979 J-3.5575
G2 X145.4683 Y30.1539 I-4.5783 J0.2166
G1 F400.0 X148.4996 Y30.0833
G1 Z-15.0
G2 F2500.0 X151.1726 Y31.1259 I1.554 J-0.0362
G2 X151.5909 Y29.8181 I-3.3711 J-1.7992
G2 X148.4996 Y30.0833 I-1.5374 J0.229
G1 F400.0 X145.5004 Y30.1532
G2 F2500.0 X153.6389 Y32.8555 I4.5531 J-0.106
G2 X154.6032 Y29.8412 I-5.8374 J-3.5288
G2 X145.5004 Y30.1532 I-4.5497 J0.206
G0 Z20.0
G0 X149.8521 Y88.0306
G1 F400.0 Z-1.0
G2 F2500.0 X151.1203 Y88.3735 I0.148 J1.969
G1 X150.4808 Y88.0844
G2 X149.8521 Y88.0306 I-0.4806 J1.9152
G1 F400.0 X149.6272 Y85.039
G2 F2500.0 X152.545 Y85.7252 I0.373 J4.9605
G1 X151.5275 Y85.2653
G2 X149.6272 Y85.039 I-1.5273 J4.7343
G1 F400.0 X149.854 Y88.0555
G1 Z-2.0
G2 F2500.0 X151.1076 Y88.395 I0.1462 J1.9441
G1 X150.473 Y88.1082
G2 X149.854 Y88.0555 I-0.4729 J1.8914
G1 F400.0 X149.6291 Y85.0639
G2 F2500.0 X152.5328 Y85.747 I0.3711 J4.9357
G1 X151.5193 Y85.2888
G2 X149.6291 Y85.0639 I-1.5191 J4.7107
G1 F400.0 X149.8559 Y88.0804
G1 Z-3.0
G2 F2500.0 X151.0948 Y88.4166 I0.1443 J1.9192
G1 X150.4653 Y88.132
G2 X149.8559 Y88.0804 I-0.4651 J1.8676
G1 F400.0 X149.6309 Y85.0888
G2 F2500.0 X152.5205 Y85.7688 I0.3692 J4.9108
G1 X151.511 Y85.3124
G2 X149.6309 Y85.0888 I-1.5109 J4.6872
G1 F400.0 X149.8577 Y88.1053
G1 Z-4.0
G2 F2500.0 X151.0821 Y88.4381 I0.1424 J1.8944
G1 X150.4576 Y88.1558
G2 X149.8577 Y88.1053 I-0.4574 J1.8438
G1 F400.0 X149.6328 Y85.1137
G2 F2500.0 X152.5083 Y85.7905 I0.3673 J4.8859
G1 X151.5028 Y85.336
G2 X149.6328 Y85.1137 I-1.5026 J4.6636
G1 F400.0 X149.8596 Y88.1302
G1 Z-5.0
G2 F2500.0 X151.0693 Y88.4596 I0.1405 J1.8695
G1 X150.4498 Y88.1796
G2 X149.8596 Y88.1302 I-0.4497 J1.82
G1 F400.0 X149.6347 Y85.1386
G2 F2500.0 X152.496 Y85.8123 I0.3655 J4.861
G1 X151.4945 Y85.3596
G2 X149.6347 Y85.1386 I-1.4944 J4.6401
G1 F400.0 X149.8615 Y88.1551
G1 Z-6.0
G2 F2500.0 X151.0565 Y88.4812 I0.1387 J1.8446
G1 X150.4421 Y88.2034
G2 X149.8615 Y88.1551 I-0.442 J1.7962
G1 F400.0 X149.6366 Y85.1635
G2 F2500.0 X152.4838 Y85.8341 I0.3636 J4.8362
G1 X151.4863 Y85.3832
G2 X149.6366 Y85.1635 I-1.4862 J4.6165
G1 F400.0 X149.8633 Y88.18
G1 Z-7.0
G2 F2500.0 X151.0438 Y88.5027 I0.1368 J1.8197
G1 X150.4344 Y88.2272
G2 X149.8633 Y88.18 I-0.4343 J1.7725
G1 F400.0 X149.6384 Y85.1884
G2 F2500.0 X152.4715 Y85.8558 I0.3617 J4.8113
G1 X151.4781 Y85.4068
G2 X149.6384 Y85.1884 I-1.4779 J4.593
G1 F400.0 X149.8652 Y88.2049
G1 Z-8.0
G2 F2500.0 X151.031 Y88.5242 I0.1349 J1.7949
G1 X150.4267 Y88.2511
G2 X149.8652 Y88.2049 I-0.4266 J1.7487
G1 F400.0 X149.6403 Y85.2133
G2 F2500.0 X152.4593 Y85.8776 I0.3598 J4.7864
G1 X151.4698 Y85.4303
G2 X149.6403 Y85.2133 I-1.4697 J4.5694
G1 F400.0 X149.8671 Y88.2298
G1 Z-9.0
G2 F2500.0 X151.0182 Y88.5457 I0.1331 J1.77
G1 X150.419 Y88.2749
G2 X149.8671 Y88.2298 I-0.4189 J1.7249
G1 F400.0 X149.6422 Y85.2382
G2 F2500.0 X152.447 Y85.8994 I0.3579 J4.7616
G1 X151.4616 Y85.4539
G2 X149.6422 Y85.2382 I-1.4615 J4.5458
G1 F400.0 X149.8689 Y88.2547
G1 Z-10.0
G2 F2500.0 X151.0054 Y88.5673 I0.1312 J1.7451
G1 X150.4113 Y88.2987
G2 X149.8689 Y88.2547 I-0.4112 J1.7011
G1 F400.0 X149.644 Y85.2631
G2 F2500.0 X152.4347 Y85.9211 I0.356 J4.7367
G1 X151.4533 Y85.4775
G2 X149.644 Y85.2631 I-1.4532 J4.5223
G1 F400.0 X149.8708 Y88.2796
G1 Z-11.0
G2 F2500.0 X150.9925 Y88.5888 I0.1293 J1.7203
G1 X150.4036 Y88.3226
G2 X149.8708 Y88.2796 I-0.4036 J1.6772
G1 F400.0 X149.6459 Y85.288
G2 F2500.0 X152.4225 Y85.9429 I0.3542 J4.7118
G1 X151.4451 Y85.5011
G2 X149.6459 Y85.288 I-1.445 J4.4987
G1 F400.0 X149.8725 Y88.3045
G1 Z-12.0
G2 F2500.0 X149.0758 Y88.5728 I0.1274 J1.6954
G1 X148.6133 Y89.016
G2 X149.8725 Y88.3045 I1.3866 J0.9839
G1 F400.0 X149.6478 Y85.3129
G2 F2500.0 X147.1543 Y86.259 I0.3521 J4.687
G1 X146.3831 Y86.9981
G2 X149.6478 Y85.3129 I3.6168 J3.0018
G1 F400.0 X149.8744 Y88.3294
G1 Z-13.0
G2 F2500.0 X149.091 Y88.5927 I0.1255 J1.6705
G1 X148.6326 Y89.032
G2 X149.8744 Y88.3294 I1.3674 J0.9679
G1 F400.0 X149.6497 Y85.3378
G2 F2500.0 X147.1699 Y86.2785 I0.3503 J4.6621
G1 X146.402 Y87.0145
G2 X149.6497 Y85.3378 I3.598 J2.9854
G1 F400.0 X149.8762 Y88.3543
G1 Z-14.0
G2 F2500.0 X149.3534 Y88.4815 I0.1236 J1.6454
G1 X148.8322 Y88.8338
G2 X149.8762 Y88.3543 I1.1677 J1.1658
G1 F400.0 X149.6515 Y85.3627
G2 F2500.0 X147.8517 Y85.8756 I0.3483 J4.637
G1 X146.974 Y86.4688
G2 X149.6515 Y85.3627 I3.0258 J3.5309
G1 F400.0 X149.8781 Y88.3792
G1 Z-15.0
G2 F2500.0 X149.365 Y88.5038 I0.1217 J1.6205
G1 X148.8485 Y88.8528
G2 X149.8781 Y88.3792 I1.1513 J1.1468
G1 F400.0 X149.6534 Y85.3876
G2 F2500.0 X147.8638 Y85.8974 I0.3464 J4.6121
G1 X146.9898 Y86.4881
G2 X149.6534 Y85.3876 I3.01 J3.5115
G0 Z20.0
G0 X248.0271 Y89.9093
G1 F400.0 Z-1.0
G2 F2500.0 X251.9307 Y89.5839 I1.9729 J0.0907
G1 Y89.5838
G2 X251.4827 Y88.6953 I-1.9302 J0.416
G1 X251.4823 Y88.6948
G2 X248.7791 Y88.4548 I-1.4777 J1.3004
G3 X248.6714 Y88.5386 I-4.2023 J-5.2823
G2 X248.0271 Y89.9093 I1.3286 J1.4614
G1 F400.0 X245.0302 Y89.7716
G2 F2500.0 X254.8634 Y88.9519 I4.9698 J0.2284
G1 Y88.9518
G2 X253.7347 Y86.7132 I-4.8629 J1.048
G1 X253.7344 Y86.7129
G2 X246.9114 Y86.1071 I-3.7299 J3.2822
G3 X246.7854 Y86.203 I-2.3346 J-2.9346
G2 X245.0302 Y89.7716 I3.2146 J3.797
G1 F400.0 X248.052 Y89.9105
G1 Z-2.0
G2 F2500.0 X251.6605 Y88.9776 I1.948 J0.0895
G1 X251.6602 Y88.977
G2 X248.8125 Y88.4668 I-1.6518 J1.0168
G3 X248.6626 Y88.5808 I-4.1621 J-5.3141
G2 X248.052 Y89.9105 I1.3374 J1.4191
G1 F400.0 X245.0552 Y89.7727
G2 F2500.0 X254.2151 Y87.4046 I4.9448 J0.2273
G1 X254.2149 Y87.4043
G2 X246.9627 Y86.105 I-4.2065 J2.5895
G3 X246.7866 Y86.2347 I-2.3123 J-2.9523
G2 X245.0552 Y89.7727 I3.2134 J3.7652
G1 F400.0 X248.1571 Y89.8876
G1 Z-3.0
G2 F2500.0 X251.8708 Y89.6144 I1.872 J0.0693
G3 X251.8395 Y89.4323 I6.6363 J-1.2339
G2 X251.2094 Y88.5023 I-1.8393 J0.5676
G3 X251.2067 Y88.5 I4.2404 J-5.2518
G2 X248.1571 Y89.8876 I-1.1776 J1.4568
G1 F400.0 X245.1592 Y89.7766
G2 F2500.0 X254.8202 Y89.066 I4.8699 J0.1803
G3 X254.7874 Y88.8569 I3.6868 J-0.6855
G1 X254.7838 Y88.8289
G2 X253.0941 Y86.1681 I-4.7836 J1.171
G3 X253.0925 Y86.1669 I2.3558 J-2.9177
G2 X245.1592 Y89.7766 I-3.0634 J3.79
G1 F400.0 X248.1812 Y89.8769
G1 Z-4.0
G2 F2500.0 X251.6148 Y89.0347 I1.835 J0.0609
G3 X251.5179 Y88.8571 I5.877 J-3.3201
G2 X250.6329 Y88.2084 I-1.5181 J1.1431
G3 X250.629 Y88.207 I2.2488 J-6.3644
G2 X248.1812 Y89.8769 I-0.6127 J1.7307
G1 F400.0 X245.1829 Y89.7773
G2 F2500.0 X254.2268 Y87.5591 I4.8334 J0.1604
G3 X254.1433 Y87.4028 I3.265 J-1.8445
G1 X254.0992 Y87.3153
G2 X251.6324 Y85.3798 I-4.0994 J2.6849
G3 X251.6302 Y85.379 I1.2493 J-3.5358
G2 X245.1829 Y89.7773 I-1.614 J4.5587
G1 F400.0 X248.2182 Y89.8721
G1 Z-5.0
G2 F2500.0 X251.595 Y89.0566 I1.8005 J0.0562
G3 X251.4043 Y88.685 I5.907 J-3.2665
G2 X251.0179 Y88.3575 I-0.5554 J0.2637
G3 X250.62 Y88.2303 I1.8555 J-6.49
G2 X248.2182 Y89.8721 I-0.6013 J1.698
G1 F400.0 X245.2197 Y89.7785
G2 F2500.0 X254.2204 Y87.6049 I4.799 J0.1498
G3 X254.1144 Y87.3984 I3.2817 J-1.8147
G2 X251.8425 Y85.4731 I-3.2655 J1.5503
G3 X251.6215 Y85.4024 I1.0308 J-3.6055
G2 X245.2197 Y89.7785 I-1.6028 J4.5259
G1 F400.0 X248.2127 Y89.8814
G1 Z-6.0
G2 F2500.0 X251.5806 Y89.0872 I1.7921 J0.0616
G3 X251.485 Y88.9046 I5.9317 J-3.2215
G1 X251.4726 Y88.88
G2 X250.3126 Y88.1764 I-1.4727 J1.1202
G3 X250.3089 Y88.1758 I1.1408 J-6.6529
G2 X248.2127 Y89.8814 I-0.3041 J1.7672
G1 F400.0 X245.2145 Y89.7783
G2 F2500.0 X254.2169 Y87.6554 I4.7903 J0.1647
G3 X254.1638 Y87.554 I3.2954 J-1.7897
G1 X254.0568 Y87.3417
G2 X250.8196 Y85.2196 I-4.0569 J2.6585
G3 X250.8176 Y85.2192 I0.6338 J-3.6961
G2 X245.2145 Y89.7783 I-0.8127 J4.7238
G1 F400.0 X248.2419 Y89.8799
G1 Z-7.0
G2 F2500.0 X251.5629 Y89.1107 I1.7633 J0.0592
G3 X251.4953 Y88.9801 I5.9597 J-3.1694
G1 X251.4516 Y88.8936
G2 X250.3084 Y88.201 I-1.4518 J1.1065
G3 X250.3044 Y88.2004 I1.1408 J-6.6529
G2 X248.2419 Y89.8799 I-0.2992 J1.7387
G1 F400.0 X245.2436 Y89.7793
G2 F2500.0 X254.2116 Y87.7021 I4.7616 J0.1598
G3 X254.174 Y87.6296 I3.3109 J-1.7608
G1 X254.0355 Y87.3548
G2 X250.8154 Y85.2442 I-4.0357 J2.6453
G3 X250.8132 Y85.2438 I0.6338 J-3.6961
G2 X245.2436 Y89.7793 I-0.808 J4.6952
G1 F400.0 X248.2696 Y89.8792
G1 Z-8.0
G2 F2500.0 X251.5458 Y89.1344 I1.7358 J0.0573
G3 X251.5055 Y89.0557 I5.987 J-3.1175
G1 X251.4307 Y88.9073
G2 X250.3042 Y88.2257 I-1.4308 J1.0928
G3 X250.3 Y88.2249 I1.1408 J-6.6529
G2 X248.2696 Y89.8792 I-0.2946 J1.7116
G1 F400.0 X245.2712 Y89.7802
G2 F2500.0 X254.2067 Y87.7488 I4.7342 J0.1563
G3 X254.1843 Y87.7051 I3.3261 J-1.732
G1 X254.0143 Y87.368
G2 X250.8112 Y85.2688 I-4.0144 J2.6322
G3 X250.8089 Y85.2684 I0.6338 J-3.6961
G2 X245.2712 Y89.7802 I-0.8035 J4.6681
G1 F400.0 X248.2958 Y89.8793
G1 Z-9.0
G2 F2500.0 X251.5295 Y89.1584 I1.7097 J0.056
G3 X251.3975 Y88.8846 I6.0135 J-3.0659
G2 X250.5963 Y88.2943 I-0.9289 J0.422
G3 X250.2957 Y88.2495 I0.8445 J-6.697
G2 X248.2958 Y89.8793 I-0.2902 J1.6858
G1 F400.0 X245.2974 Y89.7811
G2 F2500.0 X254.2021 Y87.7957 I4.7081 J0.1543
G3 X254.1289 Y87.6436 I3.3409 J-1.7033
G2 X250.9716 Y85.3179 I-3.6602 J1.663
G3 X250.8046 Y85.293 I0.4692 J-3.7205
G2 X245.2974 Y89.7811 I-0.7991 J4.6423
G1 F400.0 X248.3206 Y89.8802
G1 Z-10.0
G2 F2500.0 X251.5138 Y89.1826 I1.6849 J0.0553
G3 X251.3959 Y88.9339 I6.0394 J-3.0146
G2 X250.5636 Y88.3153 I-0.9699 J0.4357
G3 X250.2915 Y88.2742 I0.873 J-6.6933
G2 X248.3206 Y89.8802 I-0.286 J1.6614
G1 F400.0 X245.3222 Y89.7819
G2 F2500.0 X254.198 Y87.8428 I4.6833 J0.1536
G3 X254.1325 Y87.7046 I3.3552 J-1.6748
G2 X250.9516 Y85.3405 I-3.7065 J1.665
G3 X250.8004 Y85.3176 I0.485 J-3.7185
G2 X245.3222 Y89.7819 I-0.7949 J4.6179
G1 F400.0 X248.3966 Y89.9456
G1 Z-11.0
G2 F2500.0 X251.4516 Y90.9329 I1.6585 J0.0883
G1 X251.5536 Y90.6792
G3 X251.7041 Y90.3328 I6.2633 J2.5167
G2 X251.6754 Y89.544 I-0.7824 J-0.3664
G3 X251.5377 Y89.2855 I5.8881 J-3.3004
G2 X248.3966 Y89.9456 I-1.4827 J0.7485
G1 F400.0 X245.4008 Y89.7861
G2 F2500.0 X254.1558 Y92.2492 I4.6543 J0.2478
G1 X254.3372 Y91.7977
G3 X254.4209 Y91.6053 I3.4796 J1.3982
G2 X254.2923 Y88.0771 I-3.4991 J-1.6389
G3 X254.2158 Y87.9335 I3.2712 J-1.8336
G2 X245.4008 Y89.7861 I-4.1608 J2.1004
G1 F400.0 X248.42 Y89.9466
G1 Z-12.0
G2 F2500.0 X251.4296 Y90.9209 I1.6344 J0.0869
G1 X251.5036 Y90.7368
G3 X251.691 Y90.313 I6.2633 J2.5167
G2 X251.671 Y89.5933 I-0.7036 J-0.3405
G3 X251.5218 Y89.3086 I5.9027 J-3.2742
G2 X248.42 Y89.9466 I-1.4674 J0.7249
G1 F400.0 X245.4243 Y89.7873
G2 F2500.0 X254.1336 Y92.2379 I4.6301 J0.2462
G1 X254.2873 Y91.8554
G3 X254.3914 Y91.6199 I3.4796 J1.3982
G2 X254.2944 Y88.1381 I-3.404 J-1.6474
G3 X254.2115 Y87.98 I3.2793 J-1.819
G2 X245.4243 Y89.7873 I-4.1571 J2.0535
G1 F400.0 X248.3994 Y89.9648
G1 Z-13.0
G2 F2500.0 X250.4181 Y91.6224 I1.611 J0.0961
G3 X250.4222 Y91.6213 I1.7049 J6.5311
G2 X251.408 Y90.9079 I-0.4221 J-1.6213
G1 X251.4536 Y90.7944
G3 X251.4974 Y90.688 I6.2633 J2.5167
G2 X248.3994 Y89.9648 I-1.487 J-0.6272
G1 F400.0 X245.4048 Y89.7862
G2 F2500.0 X251.1758 Y94.5251 I4.6057 J0.2747
G3 X251.1781 Y94.5245 I0.9472 J3.6284
G2 X254.1117 Y92.2255 I-1.1781 J-4.5245
G1 X254.2373 Y91.913
G3 X254.2616 Y91.8539 I3.4796 J1.3982
G2 X245.4048 Y89.7862 I-4.2512 J-1.793
G1 F400.0 X248.3514 Y89.9233
G1 Z-14.0
G2 F2500.0 X248.35 Y90.0338 I1.6486 J0.0767
G1 X248.36 Y90.0802
G3 X248.4034 Y90.2993 I-6.5985 J1.4221
G2 X251.4732 Y90.7439 I1.6093 J-0.2915
G1 X251.4737 Y90.743
G2 X248.3514 Y89.9233 I-1.4737 J-0.743
G1 F400.0 X245.3546 Y89.7838
G2 F2500.0 X245.372 Y90.4556 I4.6454 J0.2161
G1 X245.4273 Y90.7122
G3 X245.4514 Y90.8339 I-3.6658 J0.79
G2 X254.1522 Y92.0941 I4.5613 J-0.8261
G1 X254.1525 Y92.0936
G2 X245.3546 Y89.7838 I-4.1524 J-2.0936
G1 F400.0 X248.3763 Y89.9244
G1 Z-15.0
G2 F2500.0 X248.3749 Y90.0316 I1.6237 J0.0755
G3 X248.4226 Y90.2807 I-6.6043 J1.3949
G2 X251.451 Y90.7326 I1.5887 J-0.2737
G1 X251.4514 Y90.7317
G2 X248.3763 Y89.9244 I-1.4514 J-0.7318
G1 F400.0 X245.3796 Y89.785
G2 F2500.0 X245.3968 Y90.4525 I4.6204 J0.215
G1 X245.4364 Y90.6365
G3 X245.4662 Y90.7899 I-3.6658 J0.79
G2 X254.1299 Y92.0828 I4.5452 J-0.7829
G1 X254.1302 Y92.0824
G2 X245.3796 Y89.785 I-4.1301 J-2.0824
G0 Z20.0
G0 X249.8478 Y31.9692
G1 F400.0 Z-1.0
G2 F2500.0 X251.9307 Y29.5839 I0.1522 J-1.9692
G1 Y29.5838
G2 X251.4827 Y28.6953 I-1.9301 J0.4159
G1 X251.4823 Y28.6948
G2 X248.7791 Y28.4548 I-1.4777 J1.3004
G3 X248.6714 Y28.5386 I-4.2023 J-5.2823
G2 X249.8478 Y31.9692 I1.3286 J1.4614
G1 F400.0 X249.6167 Y34.9602
G2 F2500.0 X254.8634 Y28.9519 I0.3833 J-4.9602
G1 Y28.9518
G2 X253.7347 Y26.7132 I-4.8627 J1.0479
G1 X253.7344 Y26.7129
G2 X246.9114 Y26.1071 I-3.7299 J3.2822
G3 X246.7854 Y26.203 I-2.3346 J-2.9346
G2 X249.6167 Y34.9602 I3.2146 J3.797
G1 F400.0 X249.8497 Y31.9442
G1 Z-2.0
G2 F2500.0 X251.6605 Y28.9776 I0.1503 J-1.9442
G1 X251.6602 Y28.977
G2 X248.8125 Y28.4668 I-1.6518 J1.0168
G3 X248.6626 Y28.5808 I-4.1621 J-5.3141
G2 X249.8497 Y31.9442 I1.3374 J1.4191
G1 F400.0 X249.6186 Y34.9353
G2 F2500.0 X254.2151 Y27.4047 I0.3814 J-4.9353
G1 X254.2149 Y27.4043
G2 X246.9627 Y26.105 I-4.2065 J2.5895
G3 X246.7866 Y26.2347 I-2.3123 J-2.9523
G2 X249.6186 Y34.9353 I3.2134 J3.7652
G1 F400.0 X249.8517 Y31.9193
G1 Z-3.0
G2 F2500.0 X251.6393 Y28.9907 I0.1483 J-1.9193
G1 X251.6388 Y28.9899
G2 X248.8457 Y28.4784 I-1.6267 J1.0013
G3 X248.665 Y28.6131 I-4.1217 J-5.3455
G2 X249.8517 Y31.9193 I1.335 J1.3869
G1 F400.0 X249.6205 Y34.9104
G2 F2500.0 X254.1938 Y27.4177 I0.3795 J-4.9104
G1 X254.1936 Y27.4173
G2 X247.0139 Y26.1027 I-4.1815 J2.5738
G3 X246.8239 Y26.2399 I-2.2898 J-2.9697
G1 X246.8006 Y26.2556
G2 X249.6205 Y34.9104 I3.1994 J3.7444
G1 F400.0 X249.8536 Y31.8944
G1 Z-4.0
G2 F2500.0 X251.618 Y29.0038 I0.1464 J-1.8945
G3 X251.6174 Y29.0027 I5.7478 J-3.5391
G2 X248.8782 Y28.4902 I-1.602 J0.986
G3 X248.6735 Y28.6395 I-4.0804 J-5.377
G2 X249.8536 Y31.8944 I1.3265 J1.3604
G1 F400.0 X249.6224 Y34.8855
G2 F2500.0 X254.1726 Y27.4308 I0.3776 J-4.8855
G3 X254.1722 Y27.4303 I3.1932 J-1.9662
G2 X247.0646 Y26.1004 I-4.1569 J2.5585
G3 X246.8976 Y26.2201 I-2.2669 J-2.9872
G1 X246.8164 Y26.275
G2 X249.6224 Y34.8855 I3.1836 J3.725
G1 F400.0 X249.8555 Y31.8695
G1 Z-5.0
G2 F2500.0 X251.828 Y30.418 I0.1445 J-1.8695
G1 X251.8552 Y29.7769
G2 X249.0858 Y28.3628 I-1.8573 J0.2185
G1 X249.0855 Y28.363
G2 X249.8555 Y31.8695 I0.9145 J1.637
G1 F400.0 X249.6244 Y34.8606
G2 F2500.0 X254.8164 Y30.7547 I0.3757 J-4.8606
G1 X254.8603 Y29.7212
G2 X247.6226 Y25.7438 I-4.8624 J0.2742
G1 X247.6224 Y25.7439
G2 X249.6244 Y34.8606 I2.3776 J4.256
G1 F400.0 X249.8575 Y31.8446
G1 Z-6.0
G2 F2500.0 X251.8032 Y30.4141 I0.1426 J-1.8446
G1 X251.8299 Y29.7861
G2 X249.098 Y28.3846 I-1.8324 J0.2085
G1 X249.0977 Y28.3848
G2 X249.8575 Y31.8446 I0.9023 J1.6152
G1 F400.0 X249.6263 Y34.8357
G2 F2500.0 X254.7916 Y30.7514 I0.3738 J-4.8357
G1 X254.8348 Y29.7352
G2 X247.6348 Y25.7656 I-4.8373 J0.2594
G1 X247.6346 Y25.7657
G2 X249.6263 Y34.8357 I2.3654 J4.2342
G1 F400.0 X249.8594 Y31.8197
G1 Z-7.0
G2 F2500.0 X251.7785 Y30.4103 I0.1406 J-1.8197
G1 X251.8046 Y29.7952
G2 X249.1103 Y28.4064 I-1.8075 J0.1986
G1 X249.1099 Y28.4066
G2 X249.8594 Y31.8197 I0.8901 J1.5934
G1 F400.0 X249.6282 Y34.8108
G2 F2500.0 X254.7668 Y30.7482 I0.3718 J-4.8108
G1 X254.8093 Y29.7492
G2 X247.647 Y25.7874 I-4.8121 J0.2446
G1 X247.6468 Y25.7875
G2 X249.6282 Y34.8108 I2.3532 J4.2124
G1 F400.0 X249.8983 Y31.6976
G1 Z-8.0
G2 F2500.0 X251.7886 Y29.9582 I0.1504 J-1.7335
G2 X251.5136 Y29.0253 I-2.0607 J0.1005
G2 X249.8983 Y31.6976 I-1.465 J0.9388
G1 F400.0 X249.639 Y34.6864
G2 F2500.0 X254.7879 Y29.8782 I0.4096 J-4.7222
G2 X254.0767 Y27.4656 I-5.0599 J0.1804
G2 X249.639 Y34.6864 I-4.028 J2.4985
G1 F400.0 X249.9042 Y31.6628
G1 Z-9.0
G2 F2500.0 X251.7625 Y29.9635 I0.1493 J-1.7024
G2 X251.49 Y29.0347 I-2.0686 J0.1025
G2 X249.9042 Y31.6628 I-1.4364 J0.9257
G1 F400.0 X249.6421 Y34.6514
G2 F2500.0 X254.7619 Y29.8895 I0.4115 J-4.6909
G2 X254.0541 Y27.4765 I-5.068 J0.1764
G2 X249.6421 Y34.6514 I-4.0005 J2.4839
G1 F400.0 X249.9101 Y31.6286
G1 Z-10.0
G2 F2500.0 X251.7364 Y29.9687 I0.1482 J-1.6716
G2 X251.4664 Y29.0443 I-2.0765 J0.1046
G2 X249.9101 Y31.6286 I-1.4082 J0.9128
G1 F400.0 X249.6451 Y34.6168
G2 F2500.0 X254.7361 Y29.9009 I0.4131 J-4.6598
G2 X254.0315 Y27.4875 I-5.0762 J0.1725
G2 X249.6451 Y34.6168 I-3.9732 J2.4695
G1 F400.0 X249.8939 Y31.6363
G1 Z-11.0
G2 F2500.0 X251.7103 Y29.9387 I0.1395 J-1.6713
G3 X251.7098 Y29.7691 I6.7492 J-0.1058
G2 X251.2951 Y28.8601 I-1.7098 J0.231
G3 X251.2929 Y28.8576 I5.067 J-4.4596
G2 X249.8939 Y31.6363 I-1.2595 J1.1074
G1 F400.0 X249.6444 Y34.6259
G2 F2500.0 X254.71 Y29.8917 I0.389 J-4.6609
G3 X254.7129 Y29.6736 I3.7495 J-0.0588
G1 X254.7133 Y29.6634
G2 X253.5471 Y26.8781 I-4.7134 J0.3367
G3 X253.5459 Y26.8767 I2.815 J-2.4775
G2 X249.6444 Y34.6259 I-3.5125 J3.0883
G1 F400.0 X249.8979 Y31.6056
G1 Z-12.0
G2 F2500.0 X251.6844 Y29.9408 I0.1379 J-1.643
G3 X251.6843 Y29.7672 I6.7494 J-0.0893
G2 X251.2764 Y28.8766 I-1.6844 J0.2329
G3 X251.274 Y28.874 I5.067 J-4.4596
G2 X249.8979 Y31.6056 I-1.2383 J1.0887
G1 F400.0 X249.647 Y34.5951
G2 F2500.0 X254.6841 Y29.9011 I0.3888 J-4.6325
G3 X254.6872 Y29.6921 I3.7497 J-0.0496
G1 X254.6884 Y29.6645
G2 X253.5284 Y26.8946 I-4.6884 J0.3355
G3 X253.5271 Y26.8931 I2.815 J-2.4775
G2 X249.647 Y34.5951 I-3.4913 J3.0695
G1 F400.0 X249.9017 Y31.5752
G1 Z-13.0
G2 F2500.0 X251.6585 Y29.9428 I0.1362 J-1.6149
G3 X251.6589 Y29.7657 I6.7496 J-0.0728
G2 X251.2576 Y28.8931 I-1.659 J0.2343
G3 X251.2551 Y28.8903 I5.067 J-4.4596
G2 X249.9017 Y31.5752 I-1.2172 J1.07
G1 F400.0 X249.6495 Y34.5646
G2 F2500.0 X254.6583 Y29.9105 I0.3884 J-4.6043
G3 X254.6615 Y29.7107 I3.7498 J-0.0404
G1 X254.6634 Y29.6657
G2 X253.5096 Y26.9111 I-4.6635 J0.3344
G3 X253.5083 Y26.9095 I2.815 J-2.4775
G2 X249.6495 Y34.5646 I-3.4703 J3.0508
G1 F400.0 X249.8737 Y31.6455
G1 Z-14.0
G2 F2500.0 X251.3708 Y30.919 I0.1263 J-1.6455
G2 X251.6207 Y29.7983 I-4.7852 J-1.6549
G2 X248.3629 Y30.209 I-1.6293 J0.2021
G1 X248.363 Y30.2096
G2 X249.8737 Y31.6455 I1.637 J-0.2096
G1 F400.0 X249.644 Y34.6367
G2 F2500.0 X254.0911 Y32.2112 I0.356 J-4.6367
G2 X254.6297 Y29.8209 I-7.5054 J-2.9471
G2 X245.3872 Y30.5903 I-4.6383 J0.1795
G1 X245.3873 Y30.5907
G2 X249.644 Y34.6367 I4.6127 J-0.5907
G1 F400.0 X249.8756 Y31.6206
G1 Z-15.0
G2 F2500.0 X251.3497 Y30.9057 I0.1244 J-1.6206
G2 X251.5955 Y29.8059 I-4.7011 J-1.628
G2 X248.3877 Y30.2058 I-1.6046 J0.1944
G1 X248.3878 Y30.2065
G2 X249.8756 Y31.6206 I1.6122 J-0.2065
G1 F400.0 X249.6459 Y34.6118
G2 F2500.0 X254.0694 Y32.1987 I0.3541 J-4.6118
G2 X254.6042 Y29.8336 I-7.4208 J-2.921
G2 X245.412 Y30.5871 I-4.6133 J0.1667
G1 X245.4121 Y30.5875
G2 X249.6459 Y34.6118 I4.5879 J-0.5875
( Engrave1 )
G0 Z20.0
( T10 : 1.0 )
T10 M6
M3 S1000
G0 X253.0146 Y14.7363
G1 F300.0 Z-0.3
G1 X250.9697 Y14.4902
G3 X250.7782 Y15.135 I-1.5202 J-0.1006
G3 X250.1846 Y15.4512 I-0.5628 J-0.3414
G3 X249.5927 Y15.1776 I-0.0158 J-0.7429
G3 X249.3636 Y14.7638 I1.0573 J-0.8555
G3 X249.2095 Y14.0753 I2.9987 J-1.033
G3 X249.165 Y13.3711 I6.5245 J-0.7652
G2 X249.8723 Y13.955 I1.2409 J-0.7828
G2 X250.7764 Y14.1094 I0.8524 J-2.2671
G2 X251.7314 Y13.9459 I0.0336 J-2.6746
G2 X252.54 Y13.4121 I-0.7891 J-2.075
G2 X253.0613 Y12.5844 I-1.6395 J-1.6104
G2 X253.2197 Y11.6191 I-2.6566 J-0.9318
G2 X252.3584 Y9.6738 I-2.5497 J-0.0344
G2 X251.3317 Y9.0598 I-1.9371 J2.0733
G2 X250.1494 Y8.877 I-1.14 J3.4586
G2 X248.3857 Y9.3516 I-0.0559 J3.3065
G2 X247.2197 Y10.7637 I1.5885 J2.4992
G2 X246.8271 Y12.8027 I4.8111 J1.9836
G2 X247.0155 Y14.4199 I6.5283 J0.0592
G2 X247.6885 Y15.9023 I4.3102 J-1.0627
G2 X248.7585 Y16.829 I2.3032 J-1.5786
G2 X250.1436 Y17.1211 I1.3272 J-2.8628
G2 X251.1553 Y16.9762 I0.0301 J-3.3946
G2 X252.0596 Y16.5 I-0.8178 J-2.6497
G2 X252.7138 Y15.7139 I-1.4497 J-1.8717
G2 X253.0146 Y14.7363 I-2.7168 J-1.3712
G0 Z20.0
G0 X250.6474 Y12.2237
G1 Z-0.3
G3 X250.0967 Y12.4336 I-0.5296 J-0.5621
G3 X249.4404 Y12.1406 I-0.0206 J-0.8354
G3 X249.1826 Y11.4492 I0.7411 J-0.6701
G3 X249.4287 Y10.7813 I0.9674 J-0.0229
G3 X250.0732 Y10.5059 I0.6153 J0.5481
G3 X250.7178 Y10.7813 I0.0338 J0.8128
G3 X250.9639 Y11.4551 I-0.7294 J0.6482
G3 X250.7236 Y12.1406 I-1.0486 J0.0174
G3 X250.6474 Y12.2237 I-0.6058 J-0.479
G0 Z20.0
G0 X250.1286 Y102.8768
G1 Z-0.3
G2 X250.0557 Y102.877 I-0.0275 J4.7989
G2 X248.8992 Y103.0084 I-0.0451 J4.7558
G2 X248.0819 Y103.3323 I0.7625 J3.1175
G2 X247.1318 Y104.2341 I1.3768 J2.4019
G2 X246.6279 Y105.4434 I3.2844 J2.0781
G1 X248.7139 Y105.7012
G3 X248.8372 Y105.2808 I1.9771 J0.3518
G3 X249.2502 Y104.7704 I1.0178 J0.4013
G3 X249.8857 Y104.6055 I0.6 J1.005
G3 X250.2635 Y104.6562 I0.0141 J1.3261
G3 X250.6006 Y104.834 I-0.2617 J0.9048
G3 X250.876 Y105.4492 I-0.4828 J0.5854
G3 X250.7236 Y105.9004 I-0.708 J0.0122
G3 X250.4072 Y106.1758 I-0.6862 J-0.4689
G3 X250.1181 Y106.2443 I-0.3577 J-0.8644
G3 X249.8213 Y106.2578 I-0.2802 J-2.8953
G1 X248.8486
G1 Y107.9277
G1 X249.6689
G3 X250.1133 Y107.9641 I0.0293 J2.374
G3 X250.3298 Y108.0293 I-0.1854 J1.0082
G3 X250.5127 Y108.1621 I-0.182 J0.443
G3 X250.7002 Y108.6484 I-0.586 J0.5052
G3 X250.4658 Y109.1758 I-0.6799 J0.0136
G3 X249.8506 Y109.3867 I-0.5761 J-0.6776
G3 X249.4814 Y109.33 I-0.0149 J-1.1322
G3 X249.0463 Y108.989 I0.2705 J-0.7933
G3 X248.8486 Y108.4727 I1.2292 J-0.7664
G1 X246.915 Y108.7773
G2 X247.3095 Y109.7487 I3.1075 J-0.6962
G2 X248.0283 Y110.5117 I2.2797 J-1.4275
G2 X248.9905 Y110.9774 I1.847 J-2.5895
G2 X250.0498 Y111.1211 I1.0319 J-3.6302
G2 X251.1557 Y110.9889 I0.0444 J-4.3217
G2 X252.1592 Y110.5059 I-0.688 J-2.7132
G2 X252.9561 Y108.8652 I-1.1707 J-1.5825
G2 X252.6162 Y107.793 I-1.7486 J-0.0358
G2 X251.7607 Y107.1777 I-1.3228 J0.937
G2 X252.3469 Y106.923 I-0.7375 J-2.4985
G2 X253.0029 Y106.2301 I-0.8467 J-1.4588
G2 X253.2021 Y105.2969 I-1.8682 J-0.8867
G2 X252.99 Y104.2915 I-2.2979 J-0.0402
G2 X252.3232 Y103.5098 I-1.8622 J0.9131
G2 X251.2396 Y103.0137 I-1.8335 J2.5738
G2 X250.1286 Y102.8768 I-1.1384 J4.662
G0 Z20.0
G0 X153.0205 Y104.9629
G1 Z-0.3
G1 X152.9326 Y103.0
G1 X146.8389
G1 Y104.8398
G1 X148.1982 Y105.7949
G3 X149.3115 Y106.6738 I-13.0632 J17.6912
G3 X149.876 Y107.1662 I-8.2996 J10.0853
G3 X150.3838 Y107.7168 I-2.6112 J2.9175
G3 X150.6357 Y108.4785 I-1.0664 J0.7752
G3 X150.4131 Y109.0879 I-0.8389 J0.0388
G3 X149.8447 Y109.3223 I-0.5404 J-0.5042
G3 X149.0717 Y108.8308 I-0.0237 J-0.8164
G3 X148.9239 Y108.3951 I1.6428 J-0.7999
G3 X148.8604 Y107.9395 I3.3096 J-0.6942
G1 X146.8389 Y108.332
G2 X147.1873 Y109.4871 I4.0141 J-0.5808
G2 X147.9404 Y110.4297 I2.4024 J-1.1473
G2 X150.0264 Y111.1211 I2.0187 J-2.598
G2 X151.1502 Y110.9649 I0.0414 J-3.8221
G2 X152.1475 Y110.4238 I-0.8019 J-2.6678
G2 X152.7758 Y109.5909 I-1.4374 J-1.7379
G2 X152.9736 Y108.5664 I-2.3613 J-0.9872
G2 X152.5225 Y107.0957 I-2.6658 J0.0133
G2 X152.2546 Y106.7655 I-1.9102 J1.2755
G2 X151.707 Y106.2647 I-4.6172 J4.4996
G2 X149.9033 Y104.9629 I-13.8176 J17.2439
G1 X153.0205
G0 Z20.0
G0 X152.8447 Y16.998
G1 Z-0.3
G1 X152.6338 Y15.0234
G1 X149.2822
G1 X149.1885 Y13.8926
G2 X150.6299 Y14.3438 I1.424 J-2.0214
G2 X152.4521 Y13.6289 I0.0274 J-2.6101
G2 X153.0506 Y12.759 I-1.5459 J-1.7042
G2 X153.2314 Y11.7188 I-2.6723 J-1.0005
G2 X153.0105 Y10.5901 I-2.8023 J-0.0374
G2 X152.3232 Y9.668 I-2.3661 J1.0463
G2 X151.2364 Y9.0573 I-2.0163 J2.3158
G2 X150.0029 Y8.877 I-1.1902 J3.833
G2 X148.8851 Y9.029 I-0.0289 J3.9731
G2 X147.8701 Y9.5215 I0.9344 J3.2179
G2 X146.7686 Y11.332 I1.6009 J2.2144
G1 X148.8311 Y11.584
G3 X148.967 Y11.2212 I1.3699 J0.3064
G3 X149.3847 Y10.8237 I0.816 J0.4394
G3 X149.9502 Y10.7109 I0.5335 J1.2008
G3 X150.341 Y10.7734 I0.0169 J1.1474
G3 X150.6709 Y10.9922 I-0.2739 J0.7711
G3 X150.9346 Y11.6777 I-0.7019 J0.6634
G3 X150.8663 Y12.0691 I-1.0623 J0.0164
G3 X150.6357 Y12.3926 I-0.7621 J-0.2992
G3 X149.9268 Y12.6504 I-0.6894 J-0.7922
G3 X148.9893 Y12.1465 I-0.0381 J-1.0531
G1 X147.1553 Y12.4043
G1 X147.5068 Y16.998
G1 X152.8447
G0 Z20.0
G0 X53.3838 Y12.498
G1 Z-0.3
G1 Y10.7578
G1 X52.2588
G1 Y9.0
G1 X50.0557
G1 Y10.7578
G1 X46.7861
G1 Y12.498
G1 X49.7979 Y17.1211
G1 X52.2588
G1 Y12.498
G1 X53.3838
G0 Z20.0
G0 X50.0557
G1 Z-0.3
G1 Y14.8828
G1 X48.5381 Y12.498
G1 X50.0557
G0 Z20.0
G0 Y103.0
G1 Z-0.3
G1 X47.2432
G1 Y104.7813
G1 X49.2178
G1 Y108.584
G2 X48.3569 Y108.237 I-5.0584 J11.3093
G2 X47.46 Y107.998 I-1.6883 J4.534
G1 Y109.7969
G3 X48.7459 Y110.2339 I-1.0533 J5.2095
G3 X49.3196 Y110.6086 I-1.3746 J2.731
G3 X49.7744 Y111.1211 I-1.433 J1.7299
G1 X51.5088
G1 Y104.7813
G1 X53.3955
G1 Y103.0
G1 X50.0557
( Profile1 )
S1000
G0 Z10.0
G0 X0.0 Y-3.925
G1 Z-2.0
G1 F2000.0 X300.0
G3 X303.925 Y0.0 I0.0 J3.925
G1 Y120.0
G3 X300.0 Y123.925 I-3.925 J0.0
G1 X0.0
G3 X-3.925 Y120.0 I0.0 J-3.925
G1 Y0.0
G3 X0.0 Y-3.925 I3.925 J0.0
G1 F300.0 Y-5.0623
G1 F2000.0 X300.0
G3 X305.0623 Y0.0 I0.0 J5.0623
G1 Y120.0
G3 X300.0 Y125.0623 I-5.0623 J0.0
G1 X0.0
G3 X-5.0623 Y120.0 I0.0 J-5.0623
G1 Y0.0
G3 X0.0 Y-5.0623 I5.0623 J0.0
G1 F300.0 Y-4.1
G1 Z-4.0
G1 F2000.0 X300.0
G3 X304.1 Y0.0 I0.0 J4.1
G1 Y120.0
G3 X300.0 Y124.1 I-4.1 J0.0
G1 X0.0
G3 X-4.1 Y120.0 I0.0 J-4.1
G1 Y0.0
G3 X0.0 Y-4.1 I4.1 J0.0
G1 F300.0 Y-5.0623
G1 F2000.0 X300.0
G3 X305.0623 Y0.0 I0.0 J5.0623
G1 Y120.0
G3 X300.0 Y125.0623 I-5.0623 J0.0
G1 X0.0
G3 X-5.0623 Y120.0 I0.0 J-5.0623
G1 Y0.0
G3 X0.0 Y-5.0623 I5.0623 J0.0
G1 F300.0 Y-4.2749
G1 Z-6.0
G1 F2000.0 X300.0
G3 X304.2749 Y0.0 I0.0 J4.2749
G1 Y120.0
G3 X300.0 Y124.2749 I-4.2749 J0.0
G1 X0.0
G3 X-4.2749 Y120.0 I0.0 J-4.2749
G1 Y0.0
G3 X0.0 Y-4.2749 I4.2749 J0.0
G1 F300.0 Y-5.0623
G1 F2000.0 X300.0
G3 X305.0623 Y0.0 I0.0 J5.0623
G1 Y120.0
G3 X300.0 Y125.0623 I-5.0623 J0.0
G1 X0.0
G3 X-5.0623 Y120.0 I0.0 J-5.0623
G1 Y0.0
G3 X0.0 Y-5.0623 I5.0623 J0.0
G1 F300.0 Y-4.4499
G1 Z-8.0
G1 F2000.0 X300.0
G3 X304.4499 Y0.0 I0.0 J4.4499
G1 Y120.0
G3 X300.0 Y124.4499 I-4.4499 J0.0
G1 X0.0
G3 X-4.4499 Y120.0 I0.0 J-4.4499
G1 Y0.0
G3 X0.0 Y-4.4499 I4.4499 J0.0
G1 F300.0 Y-5.0623
G1 F2000.0 X300.0
G3 X305.0623 Y0.0 I0.0 J5.0623
G1 Y120.0
G3 X300.0 Y125.0623 I-5.0623 J0.0
G1 X0.0
G3 X-5.0623 Y120.0 I0.0 J-5.0623
G1 Y0.0
G3 X0.0 Y-5.0623 I5.0623 J0.0
G1 F300.0 Y-4.6249
G1 Z-10.0
G1 F2000.0 X300.0
G3 X304.6249 Y0.0 I0.0 J4.6249
G1 Y120.0
G3 X300.0 Y124.6249 I-4.6249 J0.0
G1 X0.0
G3 X-4.6249 Y120.0 I0.0 J-4.6249
G1 Y0.0
G3 X0.0 Y-4.6249 I4.6249 J0.0
G1 F300.0 Y-5.0623
G1 F2000.0 X300.0
G3 X305.0623 Y0.0 I0.0 J5.0623
G1 Y120.0
G3 X300.0 Y125.0623 I-5.0623 J0.0
G1 X0.0
G3 X-5.0623 Y120.0 I0.0 J-5.0623
G1 Y0.0
G3 X0.0 Y-5.0623 I5.0623 J0.0
G1 F300.0 Y-4.7999
G1 Z-12.0
G1 F2000.0 X300.0
G3 X304.7999 Y0.0 I0.0 J4.7999
G1 Y120.0
G3 X300.0 Y124.7999 I-4.7999 J0.0
G1 X0.0
G3 X-4.7999 Y120.0 I0.0 J-4.7999
G1 Y0.0
G3 X0.0 Y-4.7999 I4.7999 J0.0
G1 F300.0 Y-5.0623
G1 F2000.0 X300.0
G3 X305.0623 Y0.0 I0.0 J5.0623
G1 Y120.0
G3 X300.0 Y125.0623 I-5.0623 J0.0
G1 X0.0
G3 X-5.0623 Y120.0 I0.0 J-5.0623
G1 Y0.0
G3 X0.0 Y-5.0623 I5.0623 J0.0
G1 F300.0 Y-4.9748
G1 Z-14.0
G1 F2000.0 X61.25
G0 Z-12.0
G1 X78.75
G1 F300.0 Z-14.0
G1 F2000.0 X201.25
G0 Z-12.0
G1 X218.75
G1 F300.0 Z-14.0
G1 F2000.0 X300.0
G3 X304.9748 Y0.0 I0.0 J4.9748
G1 Y41.25
G0 Z-12.0
G1 Y58.75
G1 F300.0 Z-14.0
G1 F2000.0 Y120.0
G3 X300.0 Y124.9748 I-4.9748 J0.0
G1 X238.75
G0 Z-12.0
G1 X221.25
G1 F300.0 Z-14.0
G1 F2000.0 X98.75
G0 Z-12.0
G1 X81.25
G1 F300.0 Z-14.0
G1 F2000.0 X0.0
G3 X-4.9748 Y120.0 I0.0 J-4.9748
G1 Y78.75
G0 Z-12.0
G1 Y61.25
G1 F300.0 Z-14.0
G1 F2000.0 Y0.0
G3 X0.0 Y-4.9748 I4.9748 J0.0
G1 F300.0 Y-5.0623
G1 F2000.0 X61.25
G0 Z-12.0
G1 X78.75
G1 F300.0 Z-14.0
G1 F2000.0 X201.25
G0 Z-12.0
G1 X218.75
G1 F300.0 Z-14.0
G1 F2000.0 X300.0
G3 X305.0623 Y0.0 I0.0 J5.0623
G1 Y41.25
G0 Z-12.0
G1 Y58.75
G1 F300.0 Z-14.0
G1 F2000.0 Y120.0
G3 X300.0 Y125.0623 I-5.0623 J0.0
G1 X238.75
G0 Z-12.0
G1 X221.25
G1 F300.0 Z-14.0
G1 F2000.0 X98.75
G0 Z-12.0
G1 X81.25
G1 F300.0 Z-14.0
G1 F2000.0 X0.0
G3 X-5.0623 Y120.0 I0.0 J-5.0623
G1 Y78.75
G0 Z-12.0
G1 Y61.25
G1 F300.0 Z-14.0
G1 F2000.0 Y0.0
G3 X0.0 Y-5.0623 I5.0623 J0.0
G1 F300.0 Z-15.0
G1 F2000.0 X61.25
G0 Z-12.0
G1 X78.75
G1 F300.0 Z-15.0
G1 F2000.0 X201.25
G0 Z-12.0
G1 X218.75
G1 F300.0 Z-15.0
G1 F2000.0 X300.0
G3 X305.0623 Y0.0 I0.0 J5.0623
G1 Y41.25
G0 Z-12.0
G1 Y58.75
G1 F300.0 Z-15.0
G1 F2000.0 Y120.0
G3 X300.0 Y125.0623 I-5.0623 J0.0
G1 X238.75
G0 Z-12.0
G1 X221.25
G1 F300.0 Z-15.0
G1 F2000.0 X98.75
G0 Z-12.0
G1 X81.25
G1 F300.0 Z-15.0
G1 F2000.0 X0.0
G3 X-5.0623 Y120.0 I0.0 J-5.0623
G1 Y78.75
G0 Z-12.0
G1 Y61.25
G1 F300.0 Z-15.0
G1 F2000.0 Y0.0
G3 X0.0 Y-5.0623 I5.0623 J0.0
G0 Z10.0
M5
M30

[Neptunus]

Låter lite långsökt att kablarna skulle hindra Z men det vet du ju bäst själv. Prova gärna att lägga in G64 P0.01 istället för G64 som står i början på ditt program.

"G64 - without P means to keep the best speed possible, no matter how far away from the programmed point you end up."

[H.O]

Neptunus, det är inte så att du citerar manualen för en annan styrning än Mach3? Kanske LinuxCNC/EMC2?
Jag tror inte att G64 fungerar på det sättet i Mach3, istället har man inställningarna för CV som nämndes tidigare.

Att specificera en maximal avvikelse på 0.01mm är ju för övrigt i princip som att köra i G61 mode. Det är inte många "hemmamaskiner" som hinner accelerera till någon nämvärd hastighet över sträckan 0.01mm.

[X-IL]

Jag gissar att neptunus är tredje inkarnationen av labmaster, jag kan ha fel, men det är min gissning. Det var det redan efter två inlägg.


Men jo, det kan inte vara så mycket annat än kablarna som skiljer för Z:s del, jag kan givetvis ha fel även här, får rota runt lite mer i problemet.

[tecno]

Mycket troligt att det är så då det är en massa LinuxCNC relaterat dvs inget som har med Mach3 att göra.

[säter]

Nu kör jag med "incremental arc centre" i CamBam och Mach3, jag har fräst ut den en gång tidigare, då med absolute mode, den gången fungerade det

Det kanske kan vara idé att prova "absolute mode" igen.

[Walle]

Angående blocknummer: jag måste erkänna att jag läste lite slarvigt (kollade i mobilen när jag åt lunch), men jag har läst att vissa system inte gillar när man inte har blocknummer (vissa system vägrar om man inte har blocknummer, som Bosch Alpha tex, men andra system tolkar koden anorlunda när man inte har blocknummer. Dvs två skilda G0, där den ena styr en eller två axlar, och den andra styr en annan axel, på två separata rader kan tolkas som en och samma G0). Men om det gäller mach3 vet jag ej. Vi kan nog utgå ifrån att det inte är blocknumrena som bråkar i det här fallet.

[Neptunus]

Ok, jag ber om ursäkt för att jag lade mig i denna tråd. Tänkte bara att du ville ha lite olika idéer att jobba med för att hitta en lösning på ditt problem.

Jag känner varken till Mach3 eller LinuxCNC något djupare och inte heller något om Labmaster. Däremot hittade jag Gkoden G64 i en quick referens för EMC2 när jag sökte lite snabbt på "gcode g64" i Google. Tänket att den kanske fungerade i MACH3 också eftersom jag sett Gkod med G64 i andra program för MACH3. Om det fungerar med G61 eller den där inställnngen för CV så är ju det ett uppslag till lösning också.