Svenska ElektronikForumet

Svenskt forum för elektroniksnack.
https://elektronikforumet.com/forum/

ATtiny2313-programmering misslyckas

https://elektronikforumet.com/forum/viewtopic.php?t=44705

Sida 1 av 1

ATtiny2313-programmering misslyckas

Postat: 23 augusti 2010, 20:31:33
av Argtomte
Jag sitter och har underliga problem med programmerandet av mina AVR-kretsar. Jag använder en USBTiny-programmerare ( http://www.ladyada.net/make/usbtinyisp/index.html ), och datormjukvaran "avrdude". AVRen är av modell ATtiny2313. Jag fick just 4 nya AVRer på posten och ville programmera dessa, men för varje chip står det "initialization failed, rc=-1". Det brukar ju inte vara några konstigheter, brukar innebära att man har glapp, men saken är ju att om jag sätter in min gamla ATtiny2313 så fungerar programmeringen finfint.

Är det möjligt att jag har fått fyra helt defekta AVRer av electrokit?

Här kommer detaljerad spårutskrift från avrdude:

Kod: Markera allt

E:\Elektronik\AVR-Projekt\Woodclock\default>avrdude -c usbtiny -p t2313 -vvvv

avrdude: Version 5.10, compiled on Jan 19 2010 at 10:45:23
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
         Copyright (c) 2007-2009 Joerg Wunsch

         System wide configuration file is "P:\Program\WinAVR\bin\avrdude.conf"

         Using Port                    : lpt1
         Using Programmer              : usbtiny
         AVR Part                      : ATtiny2313
         Chip Erase delay              : 9000 us
         PAGEL                         : PD4
         BS2                           : PD6
         RESET disposition             : possible i/o
         RETRY pulse                   : SCK
         serial program mode           : yes
         parallel program mode         : yes
         Timeout                       : 200
         StabDelay                     : 100
         CmdexeDelay                   : 25
         SyncLoops                     : 32
         ByteDelay                     : 0
         PollIndex                     : 3
         PollValue                     : 0x53
         Memory Detail                 :

                                  Block Poll               Page
      Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  Max
W   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ---
-- ---------
           eeprom        65     6     4    0 no        128    4      0  4000  45
00 0xff 0xff
                                  Block Poll               Page
      Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  Max
W   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ---
-- ---------
           flash         65     6    32    0 yes      2048   32     64  4500  45
00 0xff 0xff
                                  Block Poll               Page
      Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  Max
W   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ---
-- ---------
           signature      0     0     0    0 no          3    0      0     0
 0 0x00 0x00
                                  Block Poll               Page
      Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  Max
W   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ---
-- ---------
           lock           0     0     0    0 no          1    0      0  9000  90
00 0x00 0x00
                                  Block Poll               Page
      Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  Max
W   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ---
-- ---------
           lfuse          0     0     0    0 no          1    0      0  9000  90
00 0x00 0x00
                                  Block Poll               Page
      Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  Max
W   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ---
-- ---------
           hfuse          0     0     0    0 no          1    0      0  9000  90
00 0x00 0x00
                                  Block Poll               Page
      Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  Max
W   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ---
-- ---------
           efuse          0     0     0    0 no          1    0      0  9000  90
00 0x00 0x00
                                  Block Poll               Page
      Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  Max
W   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ---
-- ---------
           calibration    0     0     0    0 no          2    0      0     0
 0 0x00 0x00

         Programmer Type : USBtiny
         Description     : USBtiny simple USB programmer, http://www.ladyada.net
/make/usbtinyisp/
avrdude: programmer operation not supported

avrdude: Using SCK period of 10 usec
CMD: [ac 53 00 00] [00 00 00 00]
CMD: [ac 53 00 00] [00 00 00 00]
avrdude: initialization failed, rc=-1
         Double check connections and try again, or use -F to override
         this check.


avrdude done.  Thank you.
Med min gamla AVR fås istället:

Kod: Markera allt

E:\Elektronik\AVR-Projekt\Woodclock\default>avrdude -c usbtiny -p t2313 -vvvv

avrdude: Version 5.10, compiled on Jan 19 2010 at 10:45:23
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
         Copyright (c) 2007-2009 Joerg Wunsch

         System wide configuration file is "P:\Program\WinAVR\bin\avrdude.conf"

         Using Port                    : lpt1
         Using Programmer              : usbtiny
         AVR Part                      : ATtiny2313
         Chip Erase delay              : 9000 us
         PAGEL                         : PD4
         BS2                           : PD6
         RESET disposition             : possible i/o
         RETRY pulse                   : SCK
         serial program mode           : yes
         parallel program mode         : yes
         Timeout                       : 200
         StabDelay                     : 100
         CmdexeDelay                   : 25
         SyncLoops                     : 32
         ByteDelay                     : 0
         PollIndex                     : 3
         PollValue                     : 0x53
         Memory Detail                 :

                                  Block Poll               Page
      Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  Max
W   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ---
-- ---------
           eeprom        65     6     4    0 no        128    4      0  4000  45
00 0xff 0xff
                                  Block Poll               Page
      Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  Max
W   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ---
-- ---------
           flash         65     6    32    0 yes      2048   32     64  4500  45
00 0xff 0xff
                                  Block Poll               Page
      Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  Max
W   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ---
-- ---------
           signature      0     0     0    0 no          3    0      0     0
 0 0x00 0x00
                                  Block Poll               Page
      Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  Max
W   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ---
-- ---------
           lock           0     0     0    0 no          1    0      0  9000  90
00 0x00 0x00
                                  Block Poll               Page
      Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  Max
W   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ---
-- ---------
           lfuse          0     0     0    0 no          1    0      0  9000  90
00 0x00 0x00
                                  Block Poll               Page
      Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  Max
W   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ---
-- ---------
           hfuse          0     0     0    0 no          1    0      0  9000  90
00 0x00 0x00
                                  Block Poll               Page
      Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  Max
W   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ---
-- ---------
           efuse          0     0     0    0 no          1    0      0  9000  90
00 0x00 0x00
                                  Block Poll               Page
      Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  Max
W   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ---
-- ---------
           calibration    0     0     0    0 no          2    0      0     0
 0 0x00 0x00

         Programmer Type : USBtiny
         Description     : USBtiny simple USB programmer, http://www.ladyada.net
/make/usbtinyisp/
avrdude: programmer operation not supported

avrdude: Using SCK period of 10 usec
CMD: [ac 53 00 00] [00 00 53 00]
avrdude: AVR device initialized and ready to accept instructions

Reading |                                                    | 0% 0.00sCMD: [30
00 00 00] [00 30 00 1e]
CMD: [30 00 01 00] [00 30 00 91]
Reading | #################                                  | 33% 0.01sCMD: [30
 00 02 00] [00 30 00 0a]
Reading | ################################################## | 100% 0.02s

avrdude: Device signature = 0x1e910a
CMD: [50 00 00 00] [00 50 00 a4]
avrdude: safemode read 1, lfuse value: a4
CMD: [50 00 00 00] [00 50 00 a4]
avrdude: safemode read 2, lfuse value: a4
CMD: [50 00 00 00] [00 50 00 a4]
avrdude: safemode read 3, lfuse value: a4
avrdude: safemode: lfuse reads as A4
CMD: [58 08 00 00] [00 58 08 df]
avrdude: safemode read 1, hfuse value: df
CMD: [58 08 00 00] [00 58 08 df]
avrdude: safemode read 2, hfuse value: df
CMD: [58 08 00 00] [00 58 08 df]
avrdude: safemode read 3, hfuse value: df
avrdude: safemode: hfuse reads as DF
CMD: [50 08 00 00] [00 50 08 fe]
avrdude: safemode read 1, efuse value: fe
CMD: [50 08 00 00] [00 50 08 fe]
avrdude: safemode read 2, efuse value: fe
CMD: [50 08 00 00] [00 50 08 fe]
avrdude: safemode read 3, efuse value: fe
avrdude: safemode: efuse reads as FE
CMD: [a0 00 7c 00] [00 a0 00 ff]
CMD: [a0 00 7d 00] [00 a0 00 ff]
CMD: [a0 00 7e 00] [00 a0 00 ff]
CMD: [a0 00 7f 00] [00 a0 00 ff]

CMD: [50 00 00 00] [00 50 00 a4]
avrdude: safemode read 1, lfuse value: a4
CMD: [50 00 00 00] [00 50 00 a4]
avrdude: safemode read 2, lfuse value: a4
CMD: [50 00 00 00] [00 50 00 a4]
avrdude: safemode read 3, lfuse value: a4
avrdude: safemode: lfuse reads as A4
CMD: [58 08 00 00] [00 58 08 df]
avrdude: safemode read 1, hfuse value: df
CMD: [58 08 00 00] [00 58 08 df]
avrdude: safemode read 2, hfuse value: df
CMD: [58 08 00 00] [00 58 08 df]
avrdude: safemode read 3, hfuse value: df
avrdude: safemode: hfuse reads as DF
CMD: [50 08 00 00] [00 50 08 fe]
avrdude: safemode read 1, efuse value: fe
CMD: [50 08 00 00] [00 50 08 fe]
avrdude: safemode read 2, efuse value: fe
CMD: [50 08 00 00] [00 50 08 fe]
avrdude: safemode read 3, efuse value: fe
avrdude: safemode: efuse reads as FE
avrdude: safemode: Fuses OK

avrdude done.  Thank you.
Gammal och nya AVRer är av exakt samma typ, "ATtiny2313-20PI", jag inget annat är ikopplat som lastar benen, enbart ström, reset-pullup samt ISPheadern.

Re: ATtiny2313-programmering misslyckas

Postat: 24 augusti 2010, 09:21:45
av ds77
Jag använder inte avrdude så jag ser inte vilken hastighet du kör ISP med, prova att ställa ner denna om du har ändrat dina fuses så din gamla kör snabbare än default. Den ska ligga på <1/4 av klockan på AVR:en om jag inte missminner mig och default borde dina nya AVR ligga på 1MHz klocka.
Alla tidsangivelser är UTC+02:00 Europe/Stockholm
Sida 1 av 1

Drivs av phpBB® Forum Software © phpBB Limited

Swedish translation by phpBB Sweden © 2006-2020