Börjar om igen eftersom jag meckat så i alla möjliga inställningar, så med ny installerad Raspbian Buster image (har satt country och uppdaterat allt till senaste via ethernet och lite annat i starten) händer följande:
Först och främst om jag håller muspekaren över nätverkssymbolen (i gui't) så får jag upp en ruta där det står
Kod: Markera allt
pi@raspberrypi:~ $ dmesg
[ 0.000000] Booting Linux on physical CPU 0xf00
[ 0.000000] Linux version 4.19.66-v7+ (dom@buildbot) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1253 SMP Thu Aug 15 11:49:46 BST 2019
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi 2 Model B Rev 1.1
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] cma: Reserved 8 MiB at 0x3ac00000
[ 0.000000] On node 0 totalpages: 242688
[ 0.000000] Normal zone: 2133 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 242688 pages, LIFO batch:63
[ 0.000000] random: get_random_bytes called from start_kernel+0xac/0x4b4 with crng_init=0
[ 0.000000] percpu: Embedded 17 pages/cpu s39488 r8192 d21952 u69632
[ 0.000000] pcpu-alloc: s39488 r8192 d21952 u69632 alloc=17*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 240555
[ 0.000000] Kernel command line: coherent_pool=1M bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=PARTUUID=e37494de-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 939092K/970752K available (8192K kernel code, 629K rwdata, 2176K rodata, 1024K init, 821K bss, 23468K reserved, 8192K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xbb800000 - 0xff800000 (1088 MB)
lowmem : 0x80000000 - 0xbb400000 ( 948 MB)
modules : 0x7f000000 - 0x80000000 ( 16 MB)
.text : 0x(ptrval) - 0x(ptrval) (9184 kB)
.init : 0x(ptrval) - 0x(ptrval) (1024 kB)
.data : 0x(ptrval) - 0x(ptrval) ( 630 kB)
.bss : 0x(ptrval) - 0x(ptrval) ( 822 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 26394 entries in 78 pages
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000010] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000024] Switching to timer-based delay loop, resolution 52ns
[ 0.000356] Console: colour dummy device 80x30
[ 0.000380] console [tty1] enabled
[ 0.000440] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.000460] pid_max: default: 32768 minimum: 301
[ 0.000894] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000917] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.002172] CPU: Testing write buffer coherency: ok
[ 0.002854] CPU0: update cpu_capacity 1024
[ 0.002868] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
[ 0.003880] Setting up static identity map for 0x100000 - 0x10003c
[ 0.004112] rcu: Hierarchical SRCU implementation.
[ 0.005299] smp: Bringing up secondary CPUs ...
[ 0.006590] CPU1: update cpu_capacity 1024
[ 0.006603] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
[ 0.008038] CPU2: update cpu_capacity 1024
[ 0.008049] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
[ 0.009394] CPU3: update cpu_capacity 1024
[ 0.009405] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
[ 0.009571] smp: Brought up 1 node, 4 CPUs
[ 0.009587] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ 0.009593] CPU: All CPU(s) started in HYP mode.
[ 0.009599] CPU: Virtualization extensions available.
[ 0.010990] devtmpfs: initialized
[ 0.026824] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 0.027201] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.027229] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.028096] pinctrl core: initialized pinctrl subsystem
[ 0.029436] NET: Registered protocol family 16
[ 0.033176] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.040765] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.040778] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.041053] Serial: AMBA PL011 UART driver
[ 0.044052] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 0.089467] bcm2835-dma 3f007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1
[ 0.091762] SCSI subsystem initialized
[ 0.092091] usbcore: registered new interface driver usbfs
[ 0.092168] usbcore: registered new interface driver hub
[ 0.092327] usbcore: registered new device driver usb
[ 0.110325] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-08-15 12:06, variant start
[ 0.120565] raspberrypi-firmware soc:firmware: Firmware hash is 0e6daa5106dd4164474616408e0dc24f997ffcf3
[ 0.132550] clocksource: Switched to clocksource arch_sys_counter
[ 0.234298] VFS: Disk quotas dquot_6.6.0
[ 0.234412] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.234692] FS-Cache: Loaded
[ 0.235037] CacheFiles: Loaded
[ 0.249573] NET: Registered protocol family 2
[ 0.250675] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[ 0.250718] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.250848] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.251035] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.251224] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.251288] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.251787] NET: Registered protocol family 1
[ 0.252818] RPC: Registered named UNIX socket transport module.
[ 0.252829] RPC: Registered udp transport module.
[ 0.252836] RPC: Registered tcp transport module.
[ 0.252842] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.255095] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[ 0.259215] Initialise system trusted keyrings
[ 0.259561] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 0.273080] FS-Cache: Netfs 'nfs' registered for caching
[ 0.273912] NFS: Registering the id_resolver key type
[ 0.273958] Key type id_resolver registered
[ 0.273965] Key type id_legacy registered
[ 0.273985] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.277257] Key type asymmetric registered
[ 0.277270] Asymmetric key parser 'x509' registered
[ 0.277366] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.277618] io scheduler noop registered
[ 0.277629] io scheduler deadline registered (default)
[ 0.277899] io scheduler cfq registered
[ 0.277910] io scheduler mq-deadline registered (default)
[ 0.277919] io scheduler kyber registered
[ 0.280396] bcm2708_fb soc:fb: FB found 1 display(s)
[ 0.343318] Console: switching to colour frame buffer device 240x67
[ 0.379755] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1920x1080
[ 0.382793] bcm2835-rng 3f104000.rng: hwrng registered
[ 0.383169] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 0.384033] vc-sm: Videocore shared memory driver
[ 0.384503] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[ 0.401316] brd: module loaded
[ 0.416556] loop: module loaded
[ 0.417414] Loading iSCSI transport class v2.0-870.
[ 0.418562] libphy: Fixed MDIO Bus: probed
[ 0.418715] usbcore: registered new interface driver lan78xx
[ 0.418805] usbcore: registered new interface driver smsc95xx
[ 0.418829] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.446809] dwc_otg 3f980000.usb: base=(ptrval)
[ 0.647224] Core Release: 2.80a
[ 0.647238] Setting default values for core params
[ 0.647288] Finished setting default values for core params
[ 0.847717] Using Buffer DMA mode
[ 0.847727] Periodic Transfer Interrupt Enhancement - disabled
[ 0.847734] Multiprocessor Interrupt Enhancement - disabled
[ 0.847743] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 0.847768] Dedicated Tx FIFOs mode
[ 0.848495] WARN::dwc_otg_hcd_init:1045: FIQ DMA bounce buffers: virt = bad14000 dma = 0xfad14000 len=9024
[ 0.848532] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
Interrupt/Control Split Transaction hack enabled
[ 0.848544] dwc_otg: Microframe scheduler enabled
[ 0.848623] WARN::hcd_init_fiq:457: FIQ on core 1
[ 0.848638] WARN::hcd_init_fiq:458: FIQ ASM at 80654f4c length 36
[ 0.848655] WARN::hcd_init_fiq:497: MPHI regs_base at bb810000
[ 0.848682] dwc_otg 3f980000.usb: DWC OTG Controller
[ 0.848733] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ 0.848792] dwc_otg 3f980000.usb: irq 56, io mem 0x00000000
[ 0.848843] Init: Port Power? op_state=1
[ 0.848851] Init: Power Port (0)
[ 0.849244] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 0.849260] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.849272] usb usb1: Product: DWC OTG Controller
[ 0.849283] usb usb1: Manufacturer: Linux 4.19.66-v7+ dwc_otg_hcd
[ 0.849294] usb usb1: SerialNumber: 3f980000.usb
[ 0.850248] hub 1-0:1.0: USB hub found
[ 0.850339] hub 1-0:1.0: 1 port detected
[ 0.851180] dwc_otg: FIQ enabled
[ 0.851189] dwc_otg: NAK holdoff enabled
[ 0.851196] dwc_otg: FIQ split-transaction FSM enabled
[ 0.851212] Module dwc_common_port init
[ 0.851658] usbcore: registered new interface driver usb-storage
[ 0.851956] mousedev: PS/2 mouse device common for all mice
[ 0.853214] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 0.853526] bcm2835-cpufreq: min=600000 max=900000
[ 0.854172] sdhci: Secure Digital Host Controller Interface driver
[ 0.854179] sdhci: Copyright(c) Pierre Ossman
[ 0.854712] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[ 0.854915] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.855815] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.855981] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.856245] usbcore: registered new interface driver usbhid
[ 0.856252] usbhid: USB HID core driver
[ 0.857280] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0
[ 0.859348] [vc_sm_connected_init]: start
[ 0.869516] [vc_sm_connected_init]: end - returning 0
[ 0.871101] Initializing XFRM netlink socket
[ 0.871141] NET: Registered protocol family 17
[ 0.871314] Key type dns_resolver registered
[ 0.871890] Registering SWP/SWPB emulation handler
[ 0.873049] registered taskstats version 1
[ 0.873077] Loading compiled-in X.509 certificates
[ 0.882747] uart-pl011 3f201000.serial: cts_event_workaround enabled
[ 0.882879] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2
[ 0.882960] console [ttyAMA0] enabled
[ 0.885733] sdhost: log_buf @ (ptrval) (fad13000)
[ 0.932800] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 0.934601] of_cfs_init
[ 0.934855] of_cfs_init: OK
[ 0.935858] Waiting for root device PARTUUID=e37494de-02...
[ 0.992143] mmc0: host does not support reading read-only switch, assuming write-enable
[ 0.994592] mmc0: new high speed SDHC card at address 59b4
[ 0.996363] mmcblk0: mmc0:59b4 00000 7.37 GiB
[ 0.999489] mmcblk0: p1 p2
[ 1.062782] Indeed it is in host mode hprt0 = 00021501
[ 1.083266] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.083353] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 1.084720] devtmpfs: mounted
[ 1.124845] Freeing unused kernel memory: 1024K
[ 1.125286] Run /sbin/init as init process
[ 1.148615] random: fast init done
[ 1.272638] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.272835] Indeed it is in host mode hprt0 = 00001101
[ 1.513068] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
[ 1.513095] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.514160] hub 1-1:1.0: USB hub found
[ 1.514306] hub 1-1:1.0: 5 ports detected
[ 1.832636] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 1.928156] systemd[1]: System time before build time, advancing clock.
[ 1.963031] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
[ 1.963054] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.966133] smsc95xx v1.0.6
[ 2.058277] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:19:0a:4b
[ 2.073624] NET: Registered protocol family 10
[ 2.075701] Segment Routing with IPv6
[ 2.130397] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 2.131629] systemd[1]: Detected architecture arm.
[ 2.143554] systemd[1]: Set hostname to <raspberrypi>.
[ 2.157412] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
[ 2.352739] usb 1-1.3: new low-speed USB device number 4 using dwc_otg
[ 2.398342] uart-pl011 3f201000.serial: no DMA platform data
[ 2.493772] usb 1-1.3: New USB device found, idVendor=04f3, idProduct=0110, bcdDevice= 1.10
[ 2.493797] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.508047] input: HID 04f3:0110 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/0003:04F3:0110.0001/input/input0
[ 2.508924] hid-generic 0003:04F3:0110.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 04f3:0110] on usb-3f980000.usb-1.3/input0
[ 2.533036] input: HID 04f3:0110 Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.1/0003:04F3:0110.0002/input/input1
[ 2.533829] input: HID 04f3:0110 Consumer Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.1/0003:04F3:0110.0002/input/input2
[ 2.534091] input: HID 04f3:0110 System Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.1/0003:04F3:0110.0002/input/input3
[ 2.534381] hid-generic 0003:04F3:0110.0002: input,hidraw1: USB HID v1.10 Mouse [HID 04f3:0110] on usb-3f980000.usb-1.3/input1
[ 2.598942] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[ 2.598978] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[ 2.632665] usb 1-1.5: new high-speed USB device number 5 using dwc_otg
[ 2.763451] usb 1-1.5: New USB device found, idVendor=0bda, idProduct=8179, bcdDevice= 0.00
[ 2.763476] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.763488] usb 1-1.5: Product: 802.11n NIC
[ 2.763500] usb 1-1.5: Manufacturer: Realtek
[ 2.763511] usb 1-1.5: SerialNumber: 00E04C0001
[ 3.275488] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.291319] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.292360] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 3.293471] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.294472] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.302519] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 3.303640] systemd[1]: Listening on udev Kernel Socket.
[ 3.563432] i2c /dev entries driver
[ 4.321961] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 4.485068] systemd-journald[98]: Received request to flush runtime journal from PID 1
[ 5.325131] media: Linux media interface: v0.10
[ 5.333979] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.337868] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ 5.337898] [vc_sm_connected_init]: start
[ 5.354124] [vc_sm_connected_init]: installed successfully
[ 5.370716] videodev: Linux video capture interface: v2.00
[ 5.419444] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.419456] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.443296] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.454189] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.515209] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.524533] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[ 5.524554] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[ 5.530081] bcm2835_audio soc:audio: card created with 8 channels
[ 5.555684] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[ 5.555708] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[ 5.566919] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[ 5.566943] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[ 6.208865] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 6.360657] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 6.384412] lib80211: common routines for IEEE802.11 drivers
[ 6.384436] lib80211_crypt: registered algorithm 'NULL'
[ 6.415524] r8188eu: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.491802] Chip Version Info: CHIP_8188E_Normal_Chip_TSMC_D_CUT_1T1R_RomVer(0)
[ 6.555172] usbcore: registered new interface driver r8188eu
[ 9.739766] random: crng init done
[ 9.739875] random: 7 urandom warning(s) missed due to ratelimiting
[ 9.953938] 8021q: 802.1Q VLAN Support v1.8
[ 10.342081] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS
[ 10.487917] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 11.733814] MAC Address = 6c:fd:b9:da:76:2f
[ 11.741790] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 12.088693] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1
[ 18.400544] fuse init (API version 7.27)
