Blink without delay fråga (arduino)

C, C++, Pascal, Assembly, Raspberry, Java, Matlab, Python, BASIC, SQL, PHP, etc.
Användarvisningsbild
Thorped
Inlägg: 1065
Blev medlem: 24 maj 2010, 19:08:47
Ort: Göteborg

Blink without delay fråga (arduino)

Inlägg av Thorped »

Hej, behöver ha färdigt ett litet projekt idag men det strular för mig och jag finner inte svar på min fråga... Jag vill få en LED att vara avstängd 3 gånger så lång tid som den är på men det beskrivs inte så tydligt i koden hur man gör det, någon som vill redigera koden så jag fattar hur det ska göras?

Kod: Markera allt

// constants won't change. Used here to set a pin number:
const int ledPin =  LED_BUILTIN;// the number of the LED pin

// Variables will change:
int ledState = LOW;             // ledState used to set the LED

// Generally, you should use "unsigned long" for variables that hold time
// The value will quickly become too large for an int to store
unsigned long previousMillis = 0;        // will store last time LED was updated

// constants won't change:
const long interval = 1000;           // interval at which to blink (milliseconds)

void setup() {
  // set the digital pin as output:
  pinMode(ledPin, OUTPUT);
}

void loop() {
  // here is where you'd put code that needs to be running all the time.

  // check to see if it's time to blink the LED; that is, if the difference
  // between the current time and last time you blinked the LED is bigger than
  // the interval at which you want to blink the LED.
  unsigned long currentMillis = millis();

  if (currentMillis - previousMillis >= interval) {
    // save the last time you blinked the LED
    previousMillis = currentMillis;

    // if the LED is off turn it on and vice-versa:
    if (ledState == LOW) {
      ledState = HIGH;
    } else {
      ledState = LOW;
    }

    // set the LED with the ledState of the variable:
    digitalWrite(ledPin, ledState);
  }
}
Användarvisningsbild
sodjan
EF Sponsor
Inlägg: 43152
Blev medlem: 10 maj 2005, 16:29:20
Ort: Söderköping
Kontakt:

Re: Blink without delay fråga (arduino)

Inlägg av sodjan »

Kod: Markera allt

    // if the LED is off turn it on and vice-versa:
    if (ledState == LOW) {
      ledState = HIGH;
      interval = 1000;
    } else {
      ledState = LOW;
      interval = 3000;
    }
Sen så kanske det inte kan vara en "const"...
Användarvisningsbild
sodjan
EF Sponsor
Inlägg: 43152
Blev medlem: 10 maj 2005, 16:29:20
Ort: Söderköping
Kontakt:

Re: Blink without delay fråga (arduino)

Inlägg av sodjan »

Vad menar du med att du behöver få färdigt ett projekt, men "det beskrivs inte så tydligt i koden"?
Är det inte ditt projekt?
Användarvisningsbild
Thorped
Inlägg: 1065
Blev medlem: 24 maj 2010, 19:08:47
Ort: Göteborg

Re: Blink without delay fråga (arduino)

Inlägg av Thorped »

Nä det här var bara en liten irriterande del av projektet. Tack för hjälpen iaf!
Användarvisningsbild
Thorped
Inlägg: 1065
Blev medlem: 24 maj 2010, 19:08:47
Ort: Göteborg

Re: Blink without delay fråga (arduino)

Inlägg av Thorped »

sodjan skrev: 14 februari 2021, 13:37:47

Kod: Markera allt

    // if the LED is off turn it on and vice-versa:
    if (ledState == LOW) {
      ledState = HIGH;
      interval = 1000;
    } else {
      ledState = LOW;
      interval = 3000;
    }
Sen så kanske det inte kan vara en "const"...

Brorsan hjälpte mig dock lite så löste sig ändå fast på ett annat vis...

Kod: Markera allt

const int ledPin =  13;
// Variables will change:
int ledState = LOW;             // ledState used to set the LED
int counter_1 = 0;              

unsigned long previousMillis = 0;        //Generally, you should use "unsigned long" for variables that hold time, The value will quickly become too large for an int to store. Will store last time LED was updated

// constants won't change:
const long interval = 5000;           // interval at which to blink (milliseconds)



void setup() {
  // set the digital pin as output:
  pinMode(ledPin, OUTPUT);
}

void loop() {
  // here is where you'd put code that needs to be running all the time.

  // check to see if it's time to blink the LED; that is, if the difference
  // between the current time and last time you blinked the LED is bigger than
  // the interval at which you want to blink the LED.
  unsigned long currentMillis = millis();

  if (currentMillis - previousMillis >= interval) {
    // save the last time you blinked the LED
    previousMillis = currentMillis;

    // if the LED is off turn it on and vice-versa:
    if (counter_1 == 0) {
      ledState = HIGH;
    } else {
      ledState = LOW;
    }

    counter_1 = (counter_1 + 1) % 4;

    // set the LED with the ledState of the variable:
    digitalWrite(ledPin, ledState);
  }
}
Skriv svar